MITSUBISHI WDC-BI-V04 Computer Communication Board Card
| Brand/Manufacturer | MITSUBISHI / JAPAN |
| Part Number | WDC-BI-V04 |
| Alternate Part Number | WDC-BI-V04 |
| Description | Computer Communication Board Card |
| Dimennsions | 15.6cm x 15.9cm x 3.4 cm |
| Weight | 0.32kg |
Product Details
Overcurrent protection
The overcurrent proctector shuts off the 5VDC and/or 24VDC
circuit(s) and stops the system if the current exceeding the
specified value flows in the circuit(s).
As this results in voltage drop, the power supply module LED turns
OFF or is dimly lit.
When this device is activated, eliminate probable causes such as
insufficient current capacity or short circuit, and then start the
system. When the current has reached the normal value, the system
will start from the first.
Overvoltage protection
The overvoltage protector shuts off the 5VDC circuit and stops the
system if overvoltage of 5.5 to 6.5V is applied to the circuit.
The power supply module LED turns OFF. When restarting the system,
switch the input power OFF, then back ON. The system is started up
with an initial start.If the system is not booted and the LED
remains off, this means that the power supply module has to be
replaced.
Allowable period of momentary power failure
The allowable momentary power failure period of PLC CPUs varies
depending on the power supply module used. In the system using the
A63P, it is the time from when the primary side of
the stabilized power supply supplying 24VDC to the A63P turns OFF
until the voltage (secondary side) has dropped from 24VDC to the
specified value (15.6VDC) or less
Inrush current
If power is reapplied immediately after power OFF (within 5
seconds), an inrush current exceeding the specified value may flow
(for 2ms or less). Therefore, before reapplying power, make sure
that 5 seconds have elapsed after power off. When selecting a fuse
or breaker for an external circuit, consider the above as well as
meltdown and detection characteristics.
Moore News
POWER INDUSTRY
Thermal power industry with power industry capabilities:
With the development of society, network technology, computer
technology and PLC control technology are becoming more and more
mature.
All auxiliary control systems of thermal power plants can enter the
whole plant auxiliary network control system to realize complete
monitoring operation in the centralized control room. The level of
automation has been greatly improved, and the efficiency of the
whole plant has been improved.
Process automation
Human Machine Interface (HMI)
Security system
Servo drive motor
If the required equipment is no longer produced by the original
equipment manufacturer, It can be purchased through Moore
Automationde's global industrial automation parts supplier to
ensure production operations are in place.
More Products
| HONEYWELL | 51305508-200 | BENTLY NEVADA | 990-05-50-02-01 |
| HONEYWELL | SPS5713 51199930-100 | BENTLY NEVADA | 991-06-50-01-01 |
| HONEYWELL | 51202343-001 | BENTLY NEVADA | 3300/20 |
| HONEYWELL | 51305896-200 | BENTLY NEVADA | 3300/30 |
| HONEYWELL | CC-PDIS01 51405042-175 | BENTLY NEVADA | 136483-01 |
| HONEYWELL | FC-TDOL-0724 | BENTLY NEVADA | 81544-01 |
| GE | DS200UPSAG1AGD | SHNEIDER | 140CPU53414B |
| GE | DS6800CCID1D1D | SHNEIDER | 140CRA21220 |
| GE | DS200TCEAG1BTF | SHNEIDER | 140CRA93200 |
| GE | DS200CPCAG1ABB | SHNEIDER | 140CRP93200 |
| GE | DS200CTBAG1ADD | SHNEIDER | 140DAI55300 |
Contact Us
miya@mvme.cn(Click)
Email: miya@mvme.cn
QQ: 2851195450
Tel: 86-18020776792
Skype: miyazheng52
