Fast Setting Factory Price Liquid Silicone Rubber LSR For
Kitchenware
Description
RUI-HE 6250-18® is a kind of two-component liquid silicone rubber
for injection molding processes, consisted of part A and part B. It
can be used to produce pacifiers and other baby products with high
transparent,high tear resistance and good resistance to yellow. All
LSR are platinum cured (vulcanized) materials which are mixed in a
1 : 1 ratio by weight.
Advantages
1) Flexible and low viscosity which will copy finest details and
patterns from exquisite products.
2) Durable with good strength, top quality to guarantee molding
times
3) Easily demolding
4) Not oily, no bubbles
5) Can resist high temperature 200℃ - 350℃, and low temperature
-65℃
6) Low shrinkage less than 0.2%, platinum cure type is less than
0.1%
7) Aging resistance, acid and alkali resistance
8) Platinum cure silicone is FDA certified, nontoxic, odorless
Typical Properties
| 6250-18® |
| Unit | Part - A | Part - B |
| Appearance | / | transparent | transparent |
| Shore A Hardness | A | 18 |
| Tensile Strength | MPa | 5 |
| Elongation | % | 800 |
| Tear Strength | KN/m | 12 |
| Viscosity | Pa.s | 600 |
| Density | g/cm3 | 1.08 |
| Resilience | % | 50 |
| Tensile set | % | 3.4 |
| Line shrinkage | % | 2.5 |
These figures are for reference only, please contact us for
details.
Mixing ratio of components A : B = 1 : 1.
Vulcanization: 150 °C / 5 min
Notice
This product cannot be contacted with compounds containing N, P, S
to avoid affecting the catalytic effect of platinum.
Applications
Because of the outstanding properties 6250-18® liquid silicone
rubber is particularly suitable for pacifiers and other baby
products.
Packaging & Storage
Available in 20kg pails or 200kg drums.
Store in a cool, dry place out of direct sunlight,
use it within 12 months from the day of manufacture.
Certificate
Rui-He 6250-18® Liquid silicone rubber obtained the following test
certificate: RoHS, FDA.21.177, REACH, PAHS, ISO9001:2016, etc
FAQ
1.Q: Why you should choose us?
A: You will find a reliable suppliers(the best choice)when you
received the samples from us.
2.Q: Do you allow small quantity order ?
A: We accept small quantity order and also pay attention to each of
our clients.
3.Q: Can you print custom logo on the product?
A: Yes, we can silk-screen print and pad print on it.
4. Q: What are all the ways to form silicone (e.g. die cut,
compression molding, etc.)?
A: High temperature vulcanizing machine mold.
5.Q: What should I care of silicone product?
A: Silicone is easy to care and clean. Regularly you can wipe the
outside of the product with a damp cloth, using a liquid soap where
necessary to keep the surface clean. If the silicone contacts any
part of the body, clean it regularly with warm soapy water.
If you need to know the prices of our silicone rubbers, please
contact us. We do not provide prices in website because prices
fluctuate for many reasons.
