Motor Reducer Drive Inclined Conveyor Belt

Motor Reducer Drive Inclined Conveyor Belt Stable Performance Reliable Operation

Working principle

Belt conveyor is composed by two endpoint pulleys and a closed conveyor belt. The pulley that drives conveyor belt rotating is called drive pulley or transmission drum; the other one–only used to change conveyor belt movement direction–is called bend pulley. Drive pulley is driven by the motor through reducer, and conveyor belt dragging relies on the friction drag between the drive pulley and the conveyor belt. The drive pulleys are generally installed at the discharge end in order to increase traction and be easy to drag. Material is fed on the feed-side and landed on the rotating conveyor belt, then rely on the conveyor belt friction to be delivered to discharge end.

Feature

1. Large conveying capacity
2. Long conveying distance
3. Low horsepower compared with other types of conveyor
4. Low cost of operating and maintenance, Drum external is equipped with cleanser
5. Stable performance and reliable operation
6. Conveyor can be installed in horizontal, inclined or vertical position

Application

Belt conveyors are the logistics and transportation machinery widely needed in many industrial sectors. Due to the variety and wide specifications of belt conveyors, it can be applied to the logistics and transportation requirements of chemical, light industry, food, food, building materials, post and telecommunications, and many other departments; it can also meet various operations such as docks, storage yards, warehouses, and workshops. Line transportation requirements. Belt conveyors use belts, steel belts, steel fiber belts, plastic belts, and chemical fiber belts as conveyors to transport materials and haul workpieces. Its characteristic is that the conveyor belt that carries the material is also a traction member that transmits power, which is significantly different from other conveyor machinery. It is the most widely used type in continuous conveyors, and it is mainly belt.

Selection Conditions

• Material to be processed: _____

• Handling capacity:_____

• Bulk Density: _____t/m3

• Material temperature: _____℃

• Water content:____%

• Material is corrosive or not: ____

• Material is sticky or not: ____

• Working environment temperature: ______ ℃

• Working voltage:____V_____hz_____phase

Technical Parameters