10 Layer Rigd Printed Circuit Board , 1.6MM , FR4 IT180A , Green
Solder Mask
10 Layer Rigid Printed Circuit Board
PCB Specifications:
Layer Count: 10 Layer Rigid PCB
Material: FR4, IT180A
Board Thickness: 1.6MM
Min Hole: 0.2MM
Hole Stucture: L1-L10
Min Trace: 4/4Mil
BGA: 12Mil
Impedance Control: 100 ohm +/-10%
Solder Mas: Green
Surface Treatment: ENIG
Application: Telecommunications
Capabilities:
| Item | Capability |
| Layer Count | 1-24 Layers |
| Board Thickness | 0.1mm-6.0mm |
| Finished Board Max Size | 700mm* 800mm |
| Finished Board Thickness Tolerance | +/-10% +/-0.1(<1.0mm) |
| Warp | <0.7% |
| Major CCL Brand | KB/NanYa/LTEQ/ShengYi/Rogers Etc |
| Material Type | FR4,CEM-1,CEM-3,Aluminum,Copper,Ceramic, PI, PET |
| Drill Hole Diameter | 0.1mm-6.5mm |
| Out Layer Copper Thickness | 1/20Z-8OZ ; |
| Inner Layer Copper Thickness | 1/3OZ-6OZ |
| Aspect Ratio | 10:1 |
| PTH Hole Tolerance | +/-3mil |
| NPTH Hole Tolerance | +/-1mil |
| Copper Thickness Of PTH Wall | >10mil(25um) |
| Line Width And Space | 2/2mil |
| Min Solder Mask Bridge | 2.5mil |
| Solder Mask Alignment Tolerance | +/-2mil |
| Dimension Tolerance | +/-4mil |
| Max Gold Thickness | 200u'(0.2mil) |
| Thermal Shock | 288C, 10s, 3 Times |
| Impedance Contro | +/-10% |
| LTest Capability | PAD Size Min 0.1mm |
| Min BGA | 7mil |
| Surface Treatment | OSP, ENIG, HASL, Plating Gold, Carbon Oil,Peelable |
FAQ:
Question: Do you accept sample orders?
Answer: YES, we do accept sample orders.
Question: Do you have MOQ requirements?
Answer: Because PCB is customized products, so we do have MOQ
requirements. But the MOQ rquirement is not strict and it differs
from case to case.
Question: What is the difference between your two factories?
Answer: The HuiZhou factory mainly produce sample and small batch
pcbs. The JiangXi factory has more roboticized equipments, so it
prefers big batch production.
Question: How can you guarantee the quality of your products?
Answer: About electricty function, we will 100% test it through
flying tester or fixture test. About the surface, we have IPQC and
FQC and FQA to make sure the products with flaw do not flow to
customer's side. We also do microsection and thermal shock to make
sure the reliability of our products.
