Automatic Low E Glass Film Edge Grinding Machine For Deletion Of
Low-e Film
Insulating glass processing machines : Vertical low-e glass film
deletion machine for making double glazing glass is used to delete
the film on the low-e glass with fast speed. The deletion machine
can delete rectangle glass and shape glass, it has 6 servo motors.
Main Features:
Two-way glass access
Delete double and triple silver low-e glass
Automatically measure glass size
Automatically distinguish low-e surface
Edge deletion is adjustable
The head can be rotated 360°Safe and full automatic device
PLC control system, touch screen interface
Six servos control system
Intelligent control system, can recognize batch processing
| Max glass size | 2500mm*4500mm |
| Min glass size | 350mm*500mm |
| Wheels width | 10mm, 12mm, 15mm |
| Deletion width | 10mm - 150mm |
| Glass thickness | 3-15mm |
RFQ :
1. What is the function of the film deletion machine?
The main function is to remove the edge film of Low-e glass
2. Why should delete the low-e glass film?
To prevent the film from oxidizing when the insulating glass is
synthesized.
3. What glass needs to be deleted?
When off-line Low-e glass
4. In addition to using the vertical film deletion machine to
delete film, what other ways can remove film?
Manual, horizontal edge grinding machine, bilateral edge grinding
machine, four-edge edge grinding machine, cutting machine, etc
5. What are the advantages of using our film separator? What are
the disadvantages? What are the advantages of using other methods?
What are the disadvantages?
With our vertical film rdeletion machine can be connected to use,
save labor, film removing effect is good, glass flatness is good,
can be in addition to the large plate glass. Disadvantage is to
increase the length of the whole line, cover a large area.
Manual film removal effect is poor, slow speed. The others are film
removal before toughening, because the heating time of white glass
and Low-e glass during toughening is not the same, it will cause
glass deformation, advantage does not need too high investment.
6. Is glass before toughening divide film is good still after
toughening divide film is good? Why is that?
After toughening, film removal is good, glass deformation is small.
7. What brand of PLC, servo motor driver, frequency converter is
used to deletion machine?
At present, delta PLC servo motor and drive, inverter delta and
schneider
8. How many sections does the film deletion machine divide into?
What are the dimensions of each segment? What are the roles?
The film deletion machine is divided into three sections, the first
or the third section is 2.2 meters, mainly for glass input and
output and storage of glass, the middle section 5.3 meters, mainly
for film deletion.
9. Can the device distinguish the low-e film surface?
The film layer can be detected automatically.
10. Do you need to input the length and width of the glass when
using the film remover?
No, it's automatically detected.
Company Introduce :
JINAN LIJIANG AUTOMATION EQUIPMENT CO.,LTD
Address: Block B 1307, Green Square, Huaiyin District, Jinan, China
Tell : 0086 0531-85960498 Fax : 0086 0531-87562846
Salesperson: Hermione (+86 18353163989 / +86 13001733235)
Email: sales01@lijiang-glass.com
Website : www.lijiang-glass.com /
www.insulatingglassproductionline.com
