Disposable Mask Making Machine Non Woven Mask Machine Automatic
Face Mask Making Machine
Equipment Overview:
ZY-M900 is a semi-automation fold mask production line (typical
models such as KN95 masks).
The equipment is loaded in a full roll. Multi-layer non-woven
fabric rolls are subjected to compound roll welding. The nose line
is unwound and cut after welding. After being rolled and cut to
length, it is welded, and then the body is folded in half.
After ultrasonic welding and fusion, the final mask is rolled and
formed.
Equipment installation and configuration requirements
(1) Equipment size: 5200mm (L) × 1500mm (W) × 1900mm (H);
(2) Appearance color: international standard titanium warm gray 1C,
if there is no special instructions, follow this standard;
(3) Equipment weight: ≤ 1000kg, ground bearing ≤ 400kg / m2;
(4) Working power supply: equipment 220VAC ± 5%, 50Hz, rated power
about 14kw;
(5) Compressed air: 0.5-0.7mpa, with a flow rate of about 300L /
min;
(6) Operating environment: temperature 10-35 ℃, humidity 5-35% HR,
no combustible, corrosive gas, no dust (cleanliness no less than
100000).
