Flexing Test Swivel Machine FL-1
Product details:
The FL-1 Plug Cord Flexibility Tester is designed and manufactured
according to the standard requirement of IEC 60884-1 figure 21
which calls for 10,000 flexing at a rate of 60 flexing per minute.
Six cables or cords fitted with plugs can be tested simultaneously.
The cables are connected to a socket and the tail of the cable is
connected to the tester to detect if an internal fault occurs with
the cable wiring or accessory connection. The instrument starts in
a vertical orientation and then flexes the specimens 45° on either
side of the vertical for a total 90° of flexing. A standard rate of
60 flexing per minute is used but a slower rate can be selected if
desired.
A set of customer selected weights are included with the instrument
so that the proper force can be applied to the cable during the
test.
| Power Supply | 220V 50Hz or 115V 60Hz |
| Number of Flex Per Test | 1-999999 (selectable) |
| Number of Test Station | 6, with 6 sets of clamp device |
| Rate of Flexing | 10~60 times/min(selectable) individual counts for each station |
| Flexing Angle | Swivel angle on either side for 45° , 60°, or 90°(or
180°)(selectable) |
| Weight | 10N/20N*6(the weight of UL113g and 284g can be customized) |
| Dimensions | W*L*H=500mm *1000mm* 1100mm |
| Conforms to standard | IEC884-1 Figure 21 and clause 23.4,IEC320-1,VDE0620 |
Mechanical theory | The crank block on the reduction gearbox is driven by the electric
motor to do the reciprocating action. |
Using method:
Set up the testing sample on the swing fixture and conduct the
circuit. In the other side, the according weight is used, then set
the flexing angle and testing times as well as the required speed.
Then start the equipment. When the sample is broken off, the
corresponding counter stops working and the indicator light off. At
that time, the counter displayed is the testing times of the
samples. When the total testing times are reached, the equipment
will stop working.
This testing machine can be connected with Load of power line
tester for the load test.
Services:
1. Do not worry, it will be best services.
2. Consult us immediately.
3. We will get back to you the first time.
4. It's my pleasure.
Primary products:
Laboratory Test Equipment
Appliance Test Equipment
Medical Device Testing Equipment
Waterproof Test Equipment
Dust Testing Equipment
Flammability Testing Equipment
Electric Testing Equipment
Impact Testing Machine
Cable Testing Machine
Vibration Test Equipment
Light Testing Equipment
Communication Test Equipment
Plug Socket Tester
Leak Test System
We are looking forward to long term cooperation with customers, we
will make best service and after sales service for all of our
customers. If you have any inquiry, please don’t hesitate to
contact us. We will reply you at the first time as we can.
