Flexible Cable Torque Tester FCT-1
Our company has a core team with years of technology development,
technology transfer, technical consulting, technical services
experience, providing Appliance Test Equipment, Medical Device
Testing Equipment, Waterproof Test Equipment, Dust Testing
Equipment, Flammability Testing Equipment, Electric Testing
Equipment, Impact Testing Machine and so on.
Over the years, we focus on Laboratory Test Equipment, With
enthusiastic, professional and efficient production design and
sales service team. The quality of our products is checked by the
inspection of the exported products and 100% of the total
inspections are conducted. Choosing us means choosing high quality
products and excellent services.
Product details:
This tester conforms to IEC60884-1 clause 23.2.After testing cord
retention. the flexible cable is subjected for 1 min to a torque as
specified in the following table:
Torque test values for cord anchorages
| Rating of plug or portable socket-outlet | Flexible cable (number of cores × nominal cross-sectional area in
mm2) |
| 2*0.5 | 2*0.75 | 3*0.5 | 3*0.75 | (2 or more)*1 |
Up to and including
16A and 250V | 0,10Nm | 0.15Nm | 0.15Nm | 0.25Nm | 0.25Nm |
| 16A and above 250V | | | | | 0.35Nm |
| Above 16A | | | | | 0.425Nm |
After the test, the flexible cable shall not have been displaced by
more than 2 mm. For rewirable accessories, the end of the
conductors shall not have moved noticeably in the terminals; for
non-rewirable accessories, there shall be no break in the
electrical connections. For measurements of the longitudinal
displacement, a mark is made on the flexible cable at a distance of
approximately 20 mm from the end of the specimen or the flexible
cable guard, before it is subjected to the pull.
For non-rewirable accessories, If there is no definitive end to the
specimen or the flexible cable guard, an additional mark is made on
the body of the specimen.
The displacement of the mark on the flexible cable in relation to
the specimen or flexible cable guard is measured while the flexible
cable is subjected to the pull.
Weight: 2N/3N/5N/7N/8.5N*1
Conforms to standard: IEC60884 clause 23.2 (table 18), VDE0620
clause 23.2 (table18)
Continuous improvement, seeking higher quality level. Our highly
dedicated sales staff has never shied away from going that extra
mile to meet and exceed the customer’s expectations. We treat our
customers with the same loyalty and devotion, no matter the size of
their business or industry.
About Us
We have a clean and tidy, wide workshop and a production and
development team with rich experience, providing strong support for
your r&d and production needs! All of our products comply with
international quality standards and are greatly appreciated in a
variety of different markets throughout the world. If you are
interested in any of our products or would like to discuss a custom
order, please feel free to contact us. We are looking forward to
forming successful business relationships with new clients around
the world in the near future.
