Socket-outlet Torque Balance SOB-1
Product information:
The HT plug torque tester conforms to the standard of IEC60065
figure 11. It is used for checking whether the mechanical stress
which occurs when the Direct Plug-in Equipment with plug pin
normally insert into the socket is in the required range.
A device provided with pins intended to be introduced into fixed
socket-outlets shall not impose undue strain on these
socket-outlets.
The balancing arm of the test apparatus pivots about a horizontal
axis through the centre lines of the contact tubes of the
socket-outlet at a distance of 8 mm behind the engagement face of
the socket-outlet.
With the device not in engagement, the balancing arm is in
equilibrium, the engagement face of the socket-outlet being in the
vertical position.
After the device has been engaged, the torque to be applied to the
socket-outlet to maintain its engagement face in the vertical plane
is determined by the position of a weight on the balancing arm. The
torque shall not exceed 0.25 Nm.
Technical parameters:
| weight | 2.5N*1, 1N*1 |
| Plug | UL plug*1, Australia plug*1,all-purpose plug*1 |
| Conforms to standard | IEC60884,VDE0620,IEC60598,IEC60065Fig11 |
| Arm of force | 0-200mm |
| The distance from the contact surface and the Axis of the surface | 8mm |
About Us
Shanghai kerang technology co., ltd is located in Shanghai City,
China, and was established in 2018.It is a company specializing in
the field of automation technology: technology development,
technology transfer, technical consultation and technical service;
installation, design, commissioning and maintenance of automation
equipment; and other high-tech enterprises. And have strong R & D
capabilities in the field of test instrument industry. The testing
equipment developed by the company is widely used in many
industries such as electronics, home appliances, etc.
We have strong technical reserves and solid technical strength,
especially in the field of environmental testing equipment or
product online monitoring. The newly developed products are used in
aerospace, aerospace, nuclear industry and other projects.
Looking forward to your inquiry and negotiation.
Production Line
With years of development, we have established perfect sales
network and integrated after-sale service system at domestic and
abroad, which enables the company to provide timely, accurate and
efficient services, and won good customer reputations. The products
are sold all over in China and exported to more than 30 countries
and regions such as Europe, America, Southeast Asia, South America,
Middle East and Africa. The production, sales volume and scale are
all ranked first in the same industry.
