Corrosion Resistant Face Mask Production Line With Stable
Performance
The mask machine is to make various masks with certain filtering
performance through processes such as hot pressing, folding
molding, ultrasonic welding, scrap removal, welding of ear bands
and nose bridge strips, etc. The mask equipment is not a single
machine, it requires The cooperation of multiple machines completes
various processes.
This machine adopts PLC, touch screen control, single-phase motor
for main conveyor belt, stepping motor turning, precise
transmission, stable control and adjustable speed.
Product features:
1. High stability, low failure rate, beautiful appearance without
rust;
2. Computer PLC programming control, servo drive, high degree of
automation;
3. Photoelectric detection of raw materials to avoid mistakes and
reduce waste.
| Production speed | 100-120pcs /minute |
| Nonwoven Layers | 1-4 Layers |
| Nonwoven Material | 10-20 GSM |
| Production dimension | 17.5 *9.5 cm (can be customized) |
| Voltage | 220V/50Hz 1 phase |
| Power | 8kw |
| Weight | 1500kg |
| Machine size | 3600×700×1500mm |
Plane Mask Production Process:
1) Three layers of non-woven fabric materials are stacked together
through a machine
2) Roll up and stitch the nose clip into it
3) Make a large piece of non-woven fabric gradually narrow from
left to right along the slope to make a "folding structure"
4) Tableting: flatten the surface of the mask
5) Fully automatic single cutting and hemming of masks
6) Then use a non-woven fabric to trim the mask
7) Cut the edge again
8) Fix the hanging ear rope by hot pressing
9) Finally pass the quality inspection, sterilize and package the
finished product
| tion and commissioning. | Due to the special period, party A(Supplier) is unable to provide
on-site installation and debugging service. After installation and
debugging, party A(Supplier) shall notify party B(Buyer) to accept the equipment. Upon completion of acceptance, party B(Buyer) should ship the whole machine.Provide non - contact installation
instruction such as instructional video and remote video
instruction. Non-epidemic period, We will send 1~2 engineer for installation, training and testing in
customers' factory, offer complete technical support, after-sale
service, maintenance skills training. The air ticket, hotel and food accommodation shall be offered by the buyer and need to pay 100 USD/day/person as technical fee. |
| Warranty period and service |
- During the warranty period, if it is a product quality problem, the
supplier shall be responsible for the maintenance and provide the
maintenance accessories (vulnerable parts, such as ultrasonic waves
and mufflers, force majeure or the buyer's reason for the equipment
damage, it does not belong to the quality warranty scope).If the
equipment is damaged due to the buyer's fault, the maintenance fee
shall be borne by the buyer.
- If the buyer USES repair services or replacement parts not provided
by the supplier or approved by the supplier, the warranty period
will be suspended in advance.
|
| Delivery time | 30 days |
