High Durability Disposable Face Mask Machine , Face Mask
Manufacturing Machine
This machine is used for the automatic formation of flat masks: the
entire roll of raw materials passes through the unwinding, roller
driving, hemming, hemming, fixed-length cutting, forming, sealing,
cutting, welding ears and other processes, which are conveyed out
of the pipeline. The whole process is fully automatic, no labor is
required. The full-automatic flat mask production equipment has the
characteristics of stable performance, high output, low defect
rate, and easy operation. 1. High stability, low failure rate,
beautiful and solid without rust 2. Computer PLC programming
control, servo drive, high degree of automation 3. Photoelectric
fiber raw materials to avoid mistakes and reduce waste 4. Precise
transmission, stable control, adjustable speed, clear and firm
product embossing, good welding effect.
| Control system power | 1 Phase 220V / 50HZ |
| Air Pressure | 0.6Mpa |
| Power supply | 110V~380V/50Hz/60Hz |
| servo motor | Domestic quality |
| Control System | PLC |
| sensor | Omron, Seak |
| Pneumatic Components | SMC Yadek |
| Operation screen | 10 inch capacitive screen |
| Bearing | NSK |
| Lead screw | Hiwin |
| Security | Safety light grid |
| Equipment structure | 2 ply |
| equipment power | 3KW |
| equipment weight | 600kg |
| Driven | Ordinary motor + servo |
| Number of applicable layers | 3-layer |
| Applicable materials | PP, non-woven fabric, synthetic fiber |
| Processing methods | Ultrasonic welding |
| Finished product specifications | 175*95mm |
| Technical characteristics | |
1. Three layers of fabric are automatically aligned and feed, and
weilding sys use ultrasonic waves are continuously pressed.
2. The production line adopts the structure of 2 ply, with high
production efficiency
3. Nose clips and ear loop are automatically cut and welded by
ultrasound
4. Automatic counting and palletizing after welding earbands |
Product Features :
1. High stability, low failure rate, beautiful and solid without
rust.
2. Computer PLC programming control, servo drive, high degree of
automation.
3, photoelectric (optical fiber) detection of raw materials to
avoid errors and reduce waste. This machine is a fully automatic
production of folding mask body machine, including automatic raw
material delivery; automatic transportation, cutting of the nose
bridge strip, mask edge welding, folding, ultrasonic fusion,
forming and cutting, etc.
Product Description : Fully Automatic High Speed Disposable three
Ply Flat Earloop Nonwoven Foldable Medical Surgical Mask
Manufacturing Production Line Face Mask Making Machine
Plane Mask Production Process:
1) Three layers of non-woven fabric materials are stacked together
through a machine
2) Roll up and stitch the nose clip into it
3) Make a large piece of non-woven fabric gradually narrow from
left to right along the slope to make a "folding structure"
4) Tableting: flatten the surface of the mask
5) Fully automatic single cutting and hemming of masks
6) Then use a non-woven fabric to trim the mask
7) Cut the edge again
8) Fix the hanging ear rope by hot pressing
9) Finally pass the quality inspection, sterilize and package the
finished product
