Tungsten Carbide Standard Welding Brazed Tips for Machining of Cast
Iorn Steel Metal
Description
1) efficient machining, good high-temperature stability;
2) easy to weld, no crack or chipping;
3) smooth surface of work piece.
Strength of Tungsten Carbide Standard Welding Brazed Tips
| Type | Dimension (mm) |
| L | t | s | r |
| A5 | 5.0 | 3.0 | 2.0 | 2.0 |
| A6 | 6.0 | 4.0 | 2.5 | 2.5 |
| A8 | 8.0 | 5.0 | 3.0 | 3.0 |
| A10 | 10.0 | 6.0 | 4.0 | 4.0 |
| A12 | 12.0 | 8.0 | 5.0 | 5.0 |
| A16 | 16.0 | 10.0 | 6.0 | 6.0 |
| A20 | 20.0 | 12.0 | 7.0 | 7.0 |
| A25 | 25.0 | 14.0 | 8.0 | 8.0 |
| A32 | 32.0 | 18.0 | 10.0 | 10.0 |
| A40 | 40.0 | 22.0 | 12.0 | 12.0 |
| A50 | 50.0 | 25.0 | 14.0 | 14.0 |
Tip for use
1) structure of brazed cutting tool should have enough rigidity;
2) the brazed tips should be fixed strongly onto the holder;
3) check and ensure good condition of the holder before brazing;
4) choose the proper welding material;
5) choose the proper welding flux;
6) use correct sharpening method;
7) mount the brazed cutting tool properly;
8) resharpening the brazed cutting tool properly.
Quality Control
1) All raw materials are tested in terms of density, hardness and
T.R.S before use.
2) Every piece of product goes through in-process and final
inspection.
3) Every batch of product can be traced.
4) Gurantee: Full payment refund if any quality problem.
Grade
K10,K20,K30,P10,P20,P30,M10, etc
Application
For machining of cast iron, steel, metal, etc.
- Partical size: Fine/micro/middle/rough
