3 In 1 Non Contact Thermometer / High Precision Forehead Scan
Thermometer
Non Contact Thermometer Description
This infrared thermometer is used for measuring the temperature of
the object's surface, which is applicable for various hot,
hazardous or hard-toreach objects without contact safely and
quickly.
This unit consist of Optics, Temperature Sensor Signal amplifier,
Processing circuit and LCD Display. The Optics collected the
infrared energy emitted by object and focus onto the Sensor. Then
the sensor translates the energy into an electricity signal. This
signal will be turned out to be digital shown on the LCD after the
signal amplifier and processing circuit.
Non Contact Thermometer Product parameters
| Name | Non Contact Thermometer |
| Display Resolution | 0.1°C |
| Precision | ±0.2°C |
| Measured Distance | 1 -5cm |
| Measurement Range-Body | 32.0°C-42.5°C |
| Measurement Range-Object | 0-100℃ |
| Operating Temperature | 10-40℃ |
| Operating Humidity | <85% |
| Battery | DC3V(2 AAA batteries) |
Non Contact Thermometer Details
Precautions
Please remove the hair or sweat on the forehead before measurirg.
Select "Body temp" mode for measurement of human body temperature,
press 4# again to switch to object surface temperature mode.
Name of Parts
- Infrared detection window
- LCD
- Up button
- Body/Object mode switch button
- Down button
- Buzzer
- On-off
- Battery cover
Function Parameters and Display
- Please select "Body temp” mode for measurement of human body
temperature, and press 4# button again (body/object temperature
mode switch button) to switch to measurement mode of object surface
temperature.
- Temperature display
- LOG storage location and storage temperature value
- Switch °C/°F temperature display
- Buzzer
Instructions
1. Can store up to 32 temperature values, support temperature query
by pressing 3# up and 5# down buttons.
2. 3 set modes (F-1/F-2/F-3)
Press and hold 4# button to enter set mode F-l, press to switch
among F-1/F-2/F-3 in turn;
F-l: Temperature correction by pressing 3# up and 5# down buttons.
F-2: Set the upper limit to temperature alarm, ncte: the default
alarm temperature value is 38SC F-3: Switch °C/°F
3. When the temperature is lower than 32°C, the screen shows: Lo;
above 42.5°C, it shows Hi.
Our Services
1.We offer OEM services,Can print your own logo on the Blood
Pressure Monitos.
2.For all your inquires about us or our Blood Pressure Monitos ,we
will reply you in detail within 24 hours.
3.Good Quality,We have strict quality control system,Good
reputation in the market.
4.We own professional team have professional attitude to recommend
products and services,We will recommend to you that according to
your requirements;
After sending,we will track the products for you once every two
days, until you get the products.When you got the goods,test them,
and give me a feedback.If you have any questions about the
problem,contact with us, we will offer the solve way for you.
