Automatic Cement Compression Tester Computer Controlled Transmission System

Automatic Cement Bending And Compression Tester Computer-Controlled Testing Machine

Parameter

Feature

• Monitor: Engine is adaptive to the oil cylinder under-mounted main engine, the stretching space is located above the main engine, and the compression and bending test space is located between the lower crossbeam above the main engine and the workbench.
• Transmission system: The lower jaw base is lifted and lowered by a motor through a reducer, a chain drive mechanism, and a screw pair drive, to achieve adjustment of stretching and compression space, and the clamping method is hydraulic clamping.
• Hydraulic system:The hydraulic principle is a load-adapted oil-inflow throttle speed control system, and a manual valve controls the test process.The hydraulic oil in the oil tank drives the high-pressure gear pump into the oil passage through the motor, flows through the check valve, 10μ high-pressure oil filter, differential pressure valve group, oil delivery valve, and enters the oil cylinder. By manually controlling the opening size of the oil delivery valve, the flow into the cylinder is controlled to meet the loading requirements. After the test is completed, open the oil return valve to unload and return the cylinder.

Recen has first-class management, R&D, sales and service team, thousands of Crane load moment indicator, anti-collision and zone protection system had been supplied to our domestic and overseas clients.   

Recen load moment indicator and anti-collision system is widely used for civil construction, Water conservancy, aviation, machinery industries and etc. Various products have been exported to HongKong, the Middle East, Russia, Vietnam, Indonesia, Malaysia, Argentina, Kuwait, America and so on.