Centrifugal Casting C86300 Bronze Sleeve Bushings With Durable Long
Life
Product description
Bronze bushing. High strength copper alloy is lubricated by
lubricating oil in the groove. Its performance is the same as that
of copper bushing, but its hardness is higher. Its service life at
low speed is twice as long as that of common copper bushing. It can
be used under heavy load conditions.
Product specification
Chemical Composition:
| Cu | Sn | Pb | Zn | Fe | Ni | Sb | P | S | Al | Mn | Si |
| 60.00-66.00 | 0.2 | 0.2 | 22.00-28.00 | 2.0-4.0 | 1.0 | N/A | N/A | N/A | 5.0-7.5 | 2.5-5.0 | N/A |
Mechanical Properties:
| Tensile Strength (min) | Yield Strength (at 0.5% extention under load min) | Elongation (in 2in. or 50mm min, %) | Brinell Hardness (min) |
| Ksi | MPa | Ksi | MPa | | |
| 110 | 758 | 62 | 427 | 14 | 210
|
Production Feature :
We have thousands of cast bronze bushes, sintered bronze bushes,
flanged bushes, thrust bushes and more in stock. Our standard
bronze bushing series is equipped with internal grease groove and
non groove, various styles and sizes to meet the needs of
customers.
We are a manufacturer and distributor of bronze bushings and custom
bronze bearings. Our production processes include turning, boring,
broaching, slotting, finishing, milling, drilling, grinding and
deburring. Our standard series of bronze bushings and bronze lined
bearings come in many sizes and shapes.
Instructions for inquiry:
1. Drawing: you only need to provide one of the drawing, drawing
number, sketch and sample. (these are the premise of our service to
you, and also the important standard to facilitate your acceptance
of the workpiece after we do it well, so you must provide.)
2. Quantity: you need to customize the number of artifacts. (the
more quantity, the more favorable price
3. Material: the material requirements of the workpiece; (is it a
national standard or an enterprise standard or an export American
Standard, please indicate that these will affect the price to a
great extent!)
4. Duration: This is also an important information. If you need it
urgently, it will increase the manufacturing cost. Generally, the
manufacturing cycle of castings is 8 days
