Specification
Structure: Torque transmission with elastic element as filling cushion
Flexible or rigid: elasticity can be compensated and cushioned
Standard or non-standard: standard or non-standard (according to
customer requirements)
Material: forged steel, 45 #, 40Cr, 42CrMo, etc.
Features
- Zero rotation clearance, suitable for both the forward and the reversal rotation.
- Specially apply for servo metor and stepping motor.
- Clamp type.
Product Description
Flexible Metal Coupling has a wide range of elastic modulus, easy to obtain elastic elements
with different stiffness, light weight, large internal friction, good damping performance, more
deformation energy per unit volume storage, no mechanical friction, no lubrication, etc. However, metal materials have low strength, small load-bearing capacity, poor resistance to high and low temperatures, easy ageing and deterioration, short service life, and difficult to control dynamic performance.
Surface treatment: anti-rust treatment
Advantages of Flexible element couplings
1. Suitable for medium and large power shaft drive
2. Large transmission torque. At the same torque, most of the rotation diameter is smaller than the gear coupling, small in size and light in weight. It can partially replace the gear coupling.
3. Compared with toothed coupling, it has simple structure, fewer component parts, more convenient
manufacturing, and no gear processing machine is needed. 4. Easy maintenance, longer life, nylon pin can be
replaced after removing the baffle.
