Details of slider coupling
The structure of the slider coupling is similar to that of the
cross slider coupling. The difference is that the middle cross
slider is a square slider. Realize the coupling of the two halves
of the coupling.
Coupling is a mechanism applied to connect the transmission and
transmit the safety torque between two shafts. Slider coupling are
the first choice when the installation of two shafts is simple or
when the alignment between two shafts is hard to remain. It is
integrated with the ability not only to absorb parallelism,
deflection, and axial displacement, but improve the traditional
transmission way to solve the problem of little deflection. It's
widely applied in the market.
Product features of Slide Repair Coupling
1) Because more teeth and grooves are directly and evenly made on
the shaft and hub hole, the coupling force is relatively uniform;
2) Because of the shallow groove, the stress concentration at the
root is smaller, and the strength of the shaft and hub is less
weakened;
3) Because of the large number of teeth and the large total contact
area, it can bear large load;
4) The spline connection makes the parts on the shaft and the shaft
align well, which is suitable for the transmission of high-speed
and precision machines;
5) Good guidance, which is very important for dynamic connection.
Application of slider coupling
Widely used in general machinery, hydraulic machinery, engineering
machinery, metallurgical machinery, mining machinery, chemical
machinery and other occasions.
