Advantages
1. Suitable for medium and large power shaft drive
2. High Transmission Efficiency Can Reach 99.7%
3. High Loading Capacity: With the same external dimension, the
loading capacity is 15%~20% averagely higher than that of
straight-tooth coupling
4. Large Angular Compensation: The maximum allowable angular
misalignment is 1.5°, 50% higher than that of straight-tooth
coupling
5. More Scientific Gear Tooth Design: It avoids local stress
concentration caused by straight tooth edge extrusion, and tooth
surface friction is eased at the same time.
6. Gear tooth of external gear sleeve is horn-shaped, which makes
it easy to install and dismantle.
7. Long Service Life: The internal and external gear teeth are made
of high strength alloy steel. After quenched-tempered heat
treatment, gear teeth rigidity and wear resistance are improved.
Details
Flexible element couplings are made of rubber, polyurethane, and
nylon.
Flexible element coupling has a wide range of elastic modulus, easy
to obtain elastic elements with different stiffness, light weight,
large internal friction, good damping performance, more deformation
energy per unit volume storage, no mechanical friction, no
lubrication, etc. However, metal materials have low strength, small
load-bearing capacity, poor resistance to high and low
temperatures, easy ageing and deterioration, short service life,
and difficult to control dynamic performance.
Surface treatment: anti-rust treatment
Application
Suitable for continuous operation of industrial process power
equipment, mainly used in transmission shaft systems that require
vibration damping and buffering and compensation of the relative
displacement of the two axes.
