Product Description
Non-metallic flexible element flexible coupling details
Non-metallic flexible couplings are made of rubber, polyurethane,
and nylon.
Non-metallic elastic element flexible coupling has a wide range of
elastic modulus, easy to obtain elastic elements with different
stiffness, light weight, large internal friction, good damping
performance, more deformation energy per unit volume storage, no
mechanical friction, no lubrication, etc. However, metal materials
have low strength, small load-bearing capacity, poor resistance to
high and low temperatures, easy ageing and deterioration, short
service life, and difficult to control dynamic performance.
Surface treatment: anti-rust treatment
Advantages of non-metallic flexible element flexible couplings
1.Suitable for medium and large power shaft drive
2. Large transmission torque. At the same torque, most of the
rotation diameter is smaller than the gear coupling, small in size
and light in weight. It can partially replace the gear coupling.
3. Compared with toothed coupling, it has simple structure, fewer
component parts, more convenient manufacturing, and no gear
processing machine is needed. 4. Easy maintenance, longer life,
nylon pin can be replaced after removing the baffle.
Application of Flexible Couplings for Nonmetallic Elastic Elements
Suitable for continuous operation of industrial process power
equipment, mainly used in transmission shaft systems that require
vibration damping and buffering and compensation of the relative
displacement of the two axes.
