(1). Francis turbine has the advantages of compact structure, high
efficiency and can adapt to a wide range of water head of turbine
type. It is one of the widely used around the world;
(2). When the water flow through the turbine wheel, it enters to
radial, axial flow, so it is also called the radial axial flow
turbine;
(3). Francis turbine is also called the Francis turbine. The water
flow from the surrounding radial inflow runner, then approximate
axial flow runner, runner by the crown, under the ring and the
blade;
(4). It is applicable to the head from a range of 20 meters of up
to 700 meters, has the advantages of simple structure, stable
operation, and high efficiency, but it is generally used in the
head in the range(50 to 400 meters). Single output from tens of KW
to several 101000 tile. At present this kind of turbine maximum
output has exceeded 700000 kilowatts. A turbine is one of the most
extensively used.
2.Product Details
Water Head
| 25m-700m |
Runner Diameters
| 0.45m-5m |
Power Range
| 100KW to 70MW |
Frequency
| 50HZ/60HZ |
Generator Voltage
| 400V, 800V, 6300V, 10500V |
Layout pattern
| Horizontal or Vertical |
Material(blades)
| Stainless Steel ZG0Cr13Ni4Mo |
Excitation
| Brushless or Static excitation system |
| Generator Insulation |
F/F
|
Lifespan
| 30~50 years |
Manufacturer
| Deyang Dongsen Hydropower Equipment Co., Ltd. |
3.application
01. francis turbine 2*2000kw
02.francis turbine 3*630kw
This belongs to customized products. We could design products
according to your requirement. All of our products are strictly
designed and manufactured under ISO9001 quality management system
and TUV, BV.
our factory
4. FAQ
1. You are a trading company or a manufacture?
We are a hydro turbine generator manufacturer supplied equipment
for more than 500HPPs. The engineers have over 30 years'
experiences. Our factory is in Deyang city, Sichuan, you will take
2 hours driving after you reach Shuangliu Airport, pay a visit to
our factory you will know more about us and discuss the details.
2. What Kind of hydropower micro should I choose?We need to know water head, flow rate, voltage level, frequency,
on-grid or off-grid running, automation level from you to work out
the solution.
3: Can you do the EPC for the hydro power plant?
Yes, We can design, producing and install the equipment, we will
dispatch technologist and workers to install the equipment.
4: What the packing of the equipment?
We will use wooden box or plastic film to protect the products.
