● Weichai WP10 electronically controlled engine, the emission meets
the national non-road machinery stage III emission requirements,
intelligent and efficient, strong versatility of parts, low
maintenance costs, low comprehensive fuel consumption rate.
● The whole machine is matched with the three-power working mode,
which can be selected according to the actual working conditions
and load requirements to achieve reasonable matching of power,
efficiency and energy consumption. The unique one-key afterburning
mode can be used to get rid of the extreme working conditions such
as mud ponds.
● The whole machine adopts dual-circuit electronically controlled
static pressure drive system, with self-adaptive load, steerable
load and in-situ steering, stepless speed regulation, flexible and
efficient, and excellent performance in narrow field construction.
● Walking control is electronically controlled by single handle
operation, and working device is operated by pilot single handle
operation, which is flexible, light and comfortable to operate.
● Suspension type single pedal structure realizes synchronous
control of engine throttle and brake, small size, large foot space
and comfortable operation.
● Ergonomics hexahedral integrated cab, large space, good vision,
tight sealing.
● The integrated vibration damping system of the cab, the vibration
noise is small, and the noise at the driver's ear can be reduced to
85 decibels;
● The adjustable range of the seat is large, providing the driver
with the most comfortable manipulation posture.
● Standard rear heating and cooling air conditioner, cigarette
lighter, USB charging port, radio, sunshade, fire extinguisher,
etc., provide a richer user-friendly driving experience,
comfortable driving environment
Performance parameters
| PRODUCT | DH17-C2 |
| PERFORMANCE PARAMETERS | Operating Weight (kg) | 17500(Ripper not included) |
| Rated horsepower (kw/hp) | |
| Minimum turning radius (mm) | 2390/3600 |
| Ground pressure (kpa) | 64 |
| ENGINE | Model | Weichai WP10 |
| Emission | ChinaⅡ |
| Type | In-line,direct injection,water cooled,4-cycles,turbocharged |
| No.of cylinders×Bore×stroke (mm×mm) | 6×126mm×130mm |
| Piston displacement (L) | 9.726 |
| Horsepower/rpm (kw/rpm) | 140/1900 |
| Maximum torque (N.m/r/min) | 900/1400-1600 |
| DIMENSIONS | Length (mm) | 5250 |
| Width (mm) | 3420 |
| Height (mm) | 3080 |
Tacking and Transportation
The HD16 crawler dozer loaded and transported by a flat truck and
will be shipped by RO-RO by sea.Before loaded,the whole machine
will be coated with a layer of wax to prevent rust as customer's
request.
