Recycling Waste Paper Pulping Equipment Large Capacity Drum Pulper
Type: Pulping Equipment
Dimension(L*W*H): Configuration
Warranty:1 year
After-sales Service Provided:Video technical support, Field
installation, commissioning and training, Field maintenance and
repair service
Voltage: 380V
Power(W):132-1400kw
Computerized: No
Name: OCC paper hydraulic drum pulper for paper recycling line
Raw material: Carbon Steel or Stainless Steel
Material Feature: Fire Resistant,steel
Function: carton recycling machine
Application: carton pulping machine
Drum Diameter (mm): 2500-4250
Application / Features:
Used for mild breaking to waste paper;
Single curshing and screening.reening;
Pulping density reaches 14%-18%;
Does not damage the fiber
Main Technical Parameters:
| Type | HT-25A/B | HT-275A/B | HT-30A/B | HT-325A/B | HT-35A/B | HT-4375A/B | HT-40A/B | HT-425A/B |
| Drum Diameter: mm | 2500 | 2750 | 3000 | 3250 | 3500 | 3750 | 4000 | 4250 |
| Processing capacity: t/d | 80-170 | 130-220 | 180-300 | 230-380 | 300-510 | 410-700 | 600-1100 | 850-1400 |
| Power: kw | 132 | 200 | 280 | 355 | 500 | 630 | 900 | 1120 |
2.CHARACTERIST TICS:
Single curshing and screening
Pulping density reaches 14%-18%
Does not damage the fiber
Low breaking rate of impurity
Low power consumption
Introduction:
Waste old carton hydrapulper is the top grade paper pulp making
machine of our company. It is used for old waste newspaper and
other waste paper recycling in paper and pulp making mills. It is a
new cylinder continuous pulping equipment. The rear area of the
cylinder dilution screening area, the slurry solution was broken to
3-5% concentration filter, good slurry into the slurry tank, and
residue from the cylinder end of discharge.
Because of its excellent performance and well adaptability, it is
widely used in many paper mills in and out of China .
Pulping Equipment Drum Pulper :
1. Unique wheel convey, to reduce friction, supply low failure
rate.
2. No damage to the fiber and imourities.
3. Fewer matching sets save the cost of maintainence.
4. The only consumption of pulper lies in the rotation drum, which
is half to one third of the hydraulic pulper. It saves much power
than the traditional gear drive.
5. Combine the pulping, roughing with the deslagging, greatly save
the cost.
6. Pulping density:14-18%
7. Consistency of out flow pulping:3-4%
