High Load Low Speed Thrust Ball Bearing Axial Load Easy
Installation
1. Product Description
High Load Low Speed Thrust Ball Bearing Axial Load Easy
Installation is composed of three parts: seat ring, shaft ring and
steel ball cage.The shaft with the shaft ring, and the housing
ring.Because the ring is cushion shape, the thrust ball bearing is
divided into two types: flat base cushion type and centering
spherical cushion type.In addition, the bearing can bear the axial
load, but not the radial load.The mounting surface of the seat ring
is spherical bearing, which has the function of adjusting the
center, and can reduce the influence of the installation & the
limit speed is low.
2. Specification
| Basic material | GCr15 | Dynanic load | 160N/mm² |
| Base hardness | HRC>58 | Friction Coef | <0.16 |
| Temperature Max | 300℃ | Speed limit | dry 0.3m/s oil 6m/s |
3. Application
High Load Low Speed Thrust Ball Bearing Axial Load Easy
Installation are widely applied in automotive,machine
tool,crane,vertical water pump,jack, low speed reducer etc.
4. Advantages
The thrust ball bearing are Used for bearing one side axial load,
low speed on the machine,Unidirectional thrust ball bearing can
only bear the load of one direction, if bear the load of two
directions, must choose bidirectional thrust ball bearing.Thrust
ball bearings must be subjected to a minimum or preload.When the
shaft is perpendicular, the weight of the shaft usually exceeds the
minimum load.At this time, the axial load in the opposite direction
may be reduced.It with long operating life.
