JESW Oilless Wear Plate Standard Components For Plastic Moulds
Non-Pollution
1. Product Description
JESW Oilless Wear Plate Standard Components For Plastic Moulds
Non-Pollution is based on brass.A high performance solid lubricant
with graphite or MoS2 solid lubricants.It breaks through the
general bearing lubrication by oil film limitations.In the process
of use, through the friction heat to make the solid lubrication and
shaft friction, the formation of oil, powder co-lubrication
excellent conditions, not only protect the shaft from wear, and
make the solid lubrication characteristics eternal.Its hardness is
higher than average copper sleeve one times, at the same time, it
can adapt to different environmental conditions so that it can be
used without refueling maintenance.
2. Specification
| Basic material | CuZn25Al5Mn4 | Dynanic load | 100N/mm² |
| Base hardness | HB>210 | Friction Coef | <0.15 |
| Temperature Max | 250℃ | Speed limit | dry 0.5m/s oil 5m/s |
3. Applicationhydraulic machinery,
JESW Oilless Wear Plate Standard Components For Plastic Moulds
Non-Pollution are widely applied in plastic moulds,mining machinery etc.
4. Advantages
This oilless wear plate is suitable for the position where the
lubricating oil must be used frequently, the position where
reciprocating motion or frequent starting or stopping, and the
place where it is difficult to form oil film,can be used in the
state of self-lubrication, no need for refueling device, can
shorten the assembly period, reduce the pollution of lubricating
oil, environmental protection and beautify the social environment.
It with the excellent wear and bite resistance.
