Rinser
This machine adopts rotary washing method, mainly used for water
new bottle rinsing purpose, and then sent the bottles to filling
part. PET bottles enter the machine by distributing bottle star
wheel, and making the bottle mouth adown with clamp pincers and
overturning device by grip the bottles mouth. After sanitary water
rinse and drain, automatically turn to the bottle up, bottle after
a star wheel conveyor to the filling machine. Mainly parts of
equipment structure, washing media material, external protect frame
are high-quality stainless steel, open-gear transmission.
Into-water pipes has pressure meter. Washing machine has water
defrosting tray for recycling washing water. Washing water capacity
per bottle is 105ml/s(0.25Mpa hour)
Filler
This part is mainly used for filling water after finishing bottle
rinse.
Filling machine is introduced by Germany technology, use normal
pressure fill principle to design and produce.
It adopt normal pressure mechanism valve, make filling with high
speed and high precision of liquid level. Double leading bars
elevator structure to make the bottle up and stability.
The main drive transmission adopts gear transmission that is
opening combination drive, with high efficiency, low noise, long
life, easy maintenance, full lubrication, use of transducer control
the main drive motor speed, this machine is non degree conversion
frequency speed control.
Bottle guiding system, the structure is simple, it can quick and
easy change according to different bottle volume, this whole
machine transported by clipping bottle neck method.
PLC controlled by itself, fault display online, e.g. bottle block
or non-cap etc.
In filling tank the product material control itself, the liquid
level height adopt liquid level sensor to test, make sure stability
liquid level and reliable filling.
This machine main spare parts and electricity component are import
products
Capper
Capping part finishes the work to cap the bottles after filling by
cap elevator, and cap is conveyed to the following procedure by
conveyor chain.
Capping machine rotates through reduction box drive rotational
wheel, to make the cap leave the hopper with the function of
centrifugal force. There is a separation device for right cap and
reverse cap at the exit, when the reverse cap passes, the cap
automatically fall into and return to pipeline, and blow the
reverse cap automatically to hopper through wind power. Only right
cap could enter into skids smoothly, the volume of cap inside of
hopper will be automatic inspected by electric switch to control
cap conveyor, and that ensures best effect of cap down. When the
right cap enters into the slideway, it could smoothly enter into
cap feed plate, to prevent accidents, there is an anti reverse cap
drive plate device to match with slideway, to ensure that the
access to the cap feed plate is correct. The slideway is also
equipped with a pair of photoelectric switch, when testing no cap,
then an immediate halt to the host. In order to effectively remove
non-anti-theft ring bad caps and cleanup additional caps in hopper,
there is an active exit in front of the hopper exit can meet this
function.
