11KW full automatic Fish Type non woven Mask Machine 40pcs/min/ N95
face mask machine
Performance Characteristic
Fish type mask machine is high degree of automation, Using PLC
programming control and ultrasonic technology to stick the1-5 layer
PP non-woven, activated carbon filter material. It can do from the
mask into the nose line, embossing, folding, trimming forming a
special production process lines clear analysis, in the production
of non-deformation. Besides, it can minimize the waste material and
effectively guarantee the production of masks quality.. There is a
waste recovery. Applicable to any environment.
Technical Parameter
Power supply | power | speed | Dimension(mm) | Weight |
AC380V 50HZ | 11kw | 70pcs/min | 5000*800*1700mm | 3000kg |
INSTRUCTIONS:
1, the main motor: 1 set (TaiWan “YongKun”)
2, Ultrasonic:3 set (Shangrong)
3, the touch screen: 1 (TaiWan “Weivien”)
4, PLC: 1 (Mitsubishi)
5, Lower electric device: 1 (Delta)
6, Low-voltage electrical : 1 (delixi)
7, nailing machine: 2 sets
Maintenance and Attentions
1. Regular add the lubricated oil of the mechanical transmission
chain and bearing parts.(once a week)
2. Ultrasonic transducer may output high AC when operating ,never
touch and devoid hurt-off.
3. Never put high pressure on mould.
4. Never stop the machine urgently in the absence of special
circumstance.
5. Ban wearing inequality, gloves, long hair worker to operate the
equipment.
