Introduction:
This Super High Speed Fully Automatic Mask Making Machine is used
to produce the mask , from raw material feeding , nose wire cutting
& welding , mask blank making ,ear loop welding .And there is two
unit of ear loop weldiing section for guarantee the high capacity
.All the steps are completed fully automatic .
Technical parameter
Machine model MK-290-2
voltage 220v/380v/customized
Air compressor 6mpa
Speed 120-180pcs/min.
Power 11kw
Machine weight 2300kg
Machine size 9000*3000*1900
Feature
1. Multifunction and Higher Efficiency,lower trouble.
2. Stainless steel structure,independent electrical control box.
3. The parts surface adopts chorme dealing,covering parts of
stainless steel,looking beautiful and clean.
4. Machine with Multifunction,and change the model for each
different size shoes cover producing.
5. Automatic piece Account, Machine with Stop Protection.lity of
our machines
Application
Finish mask are widely used in anti-dust environment. Like clean
room, hospital, hotel, and daily use.
Performance Characteristic
mask machine is high degree of automation, Using PLC programming
control and ultrasonic technology to stick the 1-5 layer PP
non-woven, activated carbon filter material. It can do from the
mask into the nose line, embossing, folding, trimming forming a
special production process lines clear analysis, in the production
of non-deformation. Besides, it can minimize the waste material and
effectively guarantee the production of masks quality.. There is a
waste recovery. Applicable to any environment.
INSTRUCTIONS:
1. Ultrasonic : 2sets
2. Motor: TaiWan “YongKun”
3. Touch screen: TaiWan “Wei- Lun”
4. Inverter: TaiWan “Sunfar”
5. PLC: Japan “Mitsubishi”
Technical Parameter
Power supply |
power |
speed |
Dimension(mm) |
Weight |
AC380V/220V 50HZ | 6.5kw | 50-100pcs/min | 3160*800*1400mm | 700kg |
