40G 40km QSFP+Duplex LC Connector 1310nm Singlemode Optical
Transceivers SFP module
Features:
- 4 CWDM lanes MUX/DEMUX design
- Up to 11.2Gbps per channel bandwidth
- Aggregate bandwidth of > 40Gbps
- Duplex LC connector
- Compliant with 40G Ethernet IEEE802.3ba and 40GBASE-ER4 Standard
- QSFP MSA compliant
- APD photo-detector
- Up to 40 km transmission
- Compliant with QDR/DDR Infiniband data rates
Applications:
- Rack to rack
- Data centers Switches and Routers
- Metro networks
- Switches and Routers
- 40G BASE-ER4 Ethernet Links
Description:
The LNK-QSFP-ER4 is a transceiver module designed for 40km optical
communication applications. The design is compliant to 40GBASE-ER4
of the IEEE P802.3ba standard. The module converts 4 inputs
channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals,
and multiplexes them into a single channel for 40Gb/s optical
transmission. Reversely, on the receiver side, the module optically
de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and
converts them to 4 channel output electrical data.
The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311
and 1331 nm as members of the CWDM wavelength grid defined in ITU-T
G694.2. It contains a duplex LC connector for the optical interface
and a 38-pin connector for the electrical interface. To minimize
the optical dispersion in the long-haul system, single-mode fiber
(SMF) has to be applied in this module.
The product is designed with form factor, optical/electrical
connection and digital diagnostic interface according to the QSFP
Multi-Source Agreement (MSA). It has been designed to meet the
harshest external operating conditions including temperature,
humidity and EMI interference.
The module operates from a single +3.3V power supply and
LVCMOS/LVTTL global control signals such as Module Present, Reset,
Interrupt and Low Power Mode are available with the modules. A
2-wire serial interface is available to send and receive more
complex control signals and to obtain digital diagnostic
information. Individual channels can be addressed and unused
channels can be shut down for maximum design flexibility.
The TQP10 is designed with form factor, optical/electrical
connection and digital diagnostic interface according to the QSFP
Multi-Source Agreement (MSA). It has been designed to meet the
harshest external operating conditions including temperature,
humidity and EMI interference. The module offers very high
functionality and feature integration, accessible via a two-wire
serial interface.
Applications:
Rack to rack Data centers Switches and Routers Metro networks
Switches and Routers 40G BASE-ER4 Ethernet Links Single +3.3V power
supply operating Built-in digital diagnostic functions Temperature
range 0°C to 70°C RoHS Compliant Part
