All In One Decoration Solar Street Lights Backyards Efficient 150w
Free Guarantee
Product quick detail:
1. The die-casting integrated solar street light uses the Imported
light beads to
provide superior lumen output, 140 lm/W (lumen/watt), long-lasting
stability
and excellent visual sense.
2. The LED lights will work at night automatically. The factory
default working mode:
light on at night, light off at day automatically. (You can also
customize the working
mode according to the customer’s requirements).
3. Electronic switch instead of traditional button, avoid some issues
because of the
traditional switch flick automatically on transportation.
Die-casting design, the manufacturing
process is more delicate, the appearance is more exquisite, the
function is more powerful.
Product features:
1. Run time of a day: 13 hours
2. 4000-8000lm Lumen flux
3. Die casting Aluminum+Insulation flame retardant engineering
plastics
4. Bright control system
5. Rain or cloud resistance: 15days
6. Operation environment: -40℃ ~ 80℃
Product application:
1. Paths, laneways, carparks.
2. Entrences, roads, gates.
3. Where wiring is not economical or practical.
4. Courtyards, playgrounds.
5. Entrances and exits, muster areas.
6. Outside storage areas, perimeter lighting, etc.
Product advantages:
1. Engineering plastic housing, high strength, effective rustproof.
2. High Efficiency Monocrystalline Solar Panel.
3. Adopt high-capacity Lithium iron phosphate battery.
4. Wider receive sunlight all year.
5. Using light control system, turn on when dark, turn off when days.
6. Easy installation: It only have a light head and solar panel, you
just need to install it
one the pole. No cable;
Product installation:
1. Choose the best location for lighting to make the base of the pole
firstly, the pole is
recommended to use the height of 5-9 meters, the upper diameter of
60-110mm, the
thickness of pole is greater than 2.3mm outdoor anti-rust paint
iron or hot dip galvanized
steel pipe material.
2. Open the package and check whether the accessories are complete.
3. Before installing, adjust the angle according to you need to
set, and use a special plug
to fix the position of the lamp cap and fasteners before continuing
to tighten the screws.
4. The integrated lamp and the lamp post are fixed to each other,
and it is necessary to
tighten the hoop with screws.
5. After confirming that the screw is fully tightened between the
lamp and the lamp post,
press the switch on the rear of the lamp and stand up the pole,
then the lamp will work automatically.
light on at night, light off at day automatically.
