Plastic Multispan Greenhouse Covering 200 Micron Film Polyethylene
Production
The greenhouse is a greenhouse with the simplest structure, the
lowest cost and the most convenient installation. The frame
structure is the core structure of the tunnel greenhouse. It
includes slots, doors, ridges, arches, end posts, etc. The single
span is generally between 6 and 12 meters. Its advantages are the
largest footprint, simple installation, strong durability and long
service life. In addition, disassembly, installation and
transportation are very convenient, so the cost is the lowest, but
the most cost-effective.
| Dimension | Related data |
| Length | 10-100m |
| Width | 6-12m |
| Top height | 2.8-4m |
| Shoulder height | 1-1.5m |
| Arch spacing | 1-1.5m |
| Arch diameter | φ20mm,φ25mm,φ32mm,φ48mm,φ60mm |
| Arch thickness | 1.2mm,1.5mm,1.8mm,2.0mm,2.5mm |
| Covering material | PE film,PC sheet,ploycarbonate sheet,PEP film |
| Basic equipment | Framework,door,insect net,film |
| Foundation | Insert the arch into the ground |
| Tube material | Hot dip galvanized steel tubu |
| Thickness of PE film | 120micron 150micron 200micron |
USE
1. Vegetable cultivation
2. Flower cultivation
3. Fruits such as grapes, strawberries, watermelon, oranges etc.
4. Forestry seeding cultivation, planting ornamental trees and
shrubs.
Advantages
1. Simple structure: Galvanized steel framework+plastic film
covering +side ventilation.
2. Easily assembled: The prefabricated steel pipes can be easily
connected with some fastenings.
3. The large inner space is convenient for operation and
maintenance.
4. This tunnel greenhouse doesn't cost too much, you can make a
high output with low input.
5. Long life span: The steel structure of the greenhouse can be
used for more than 10 years.
Covering:
1. Clear PE film as the covering material;
2. Thickness is 0.15mm or 0.2mm;
3. Cover the greenhouse with the film of 1 or 2 layers;
4. Has the function of dust-proof and anti-dripping;
Irrigation system
The irrigation system is the most effective way of water-saving for
drought and water shortage area at present.The irrigation system
has two methods: drip irrigation and spray irrigation. You can
choose different irrigation methods according to the
characteristics of the crop and the local water source.
The drip irrigation:
Water pump 2.5kw, 50HZ,
with filter and relative accessories like ball valve, tee and angle
etc.
Main water pipe 20m (could be adjusted as customer requirements )
Main water pipe: Φ50mm PE material
Inlet water pipe :Φ32mm PE material
Distributive pipe: Φ32mm PE material
Drip tape hole spacing is 30cm.
One greenhouse has 5-8 columns drip tapes
