TPE Material Membrane Diaphragm Repair Kit For 3'' Inch AE1475I12
Diaphragm Pulse Valve For Dust Collector System
The electromagnetic pulse valve is the compressed air "switch" of
the dust cleaning and blowing system of the pulse bag filter. Under
the control of the output signal of the pulse injection controller,
the filter bags are injected and cleaned one by one to keep the
resistance of the precipitator within the set range, so as to
ensure the processing capacity and dust collection efficiency of
the precipitator.
The electromagnetic pulse valve controls the opening and closing of
the unloading hole of the valve body according to the electrical
signal. When the valve body is unloaded, the pressure gas in the
cavity behind the valve is discharged. The pressure gas in the
cavity in front of the valve is throttled by the negative pressure
hole on the diaphragm, the diaphragm is lifted, and the pulse valve
is injected.
When the valve body stops unloading, the pressure gas quickly fills
the rear chamber of the valve through the damping hole. Because of
the difference of the stress area on both sides of the diaphragm on
the valve body, the gas force in the rear chamber of the valve is
large, the diaphragm can reliably close the valve's nozzle, and the
pulse valve stops blowing.
The electric signal is timed in millisecond, and the moment when
the pulse valve is opened, a strong impact air flow will be
generated, so as to realize instant injection.
Main dimension of Norgren Type Pulse Valve Diaphragm Kit:
Available Models of Diaphragm Valve Repair Kits For Norgren Pulse
Valves:
YouTube video of Norgren Diaphragm Repair Kit For Norgren Pulse Valve:
Factory Production Pictures of Solenoid Valve Diaphragm Kits:
Diaphragm Features:
1. Diaphragm (Rubber or Fabric Reinforcement in Rubber Diaphragms)
is a precision functional part used check pressure or change fluid
pressure into drive power.
2. Fabric-reinforced in rubber diaphragms utilize a layer of an
engineered fabric material as part of the diaphragm comstruction.
This layer of fabric give tremendous design flexibity.
3. Fabric is made of polyester, nylon and silk and commonly used
for most applications, such like exposed to high-temperature, or
require extremely high-strength.
4. Facbric-reinforced diaphragms advantages:
* No leakage * No Lubrication * No Breakaway Force * No Friction
* Functionality Over Wide Pressure Ranges
* High Strength * Low Cost * Simple Design * Versatility
5. EPDM, Viton all available.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
