M75 Diaphragm Repair Kits For FP65 FM65 SQP75-IN SQM75-IN SQP100-IN SQM100-IN Model Solenoid Valve

M75 Diaphragm Repair Kits For FP65 FM65 SQP75-IN SQM75-IN SQP100-IN SQM100-IN Model Solenoid Valve

Analysis of the leakage of the electromagnetic pulse valve and the resonance of the diaphragm:

1. The capacity of the air bag is too small, or the air supply pipe of the air bag is too small. After injection, the air supply is seriously insufficient. The valve cannot be reopened normally and quickly (it cannot be closed), and the diaphragm fluctuates (reverberation).

2. There is no water and oil separation triplet on site, and there is no blowdown valve under the air receiver or the blowdown valve has not been closed for a long time. Water and sundries are transferred into the valve to block the small diaphragm air guide pin and small air outlet. As a result, the pulse valve cannot be reopened instantaneously, resulting in "reverberation".

3. The push rod is hit and crooked, and the diaphragm cannot be removed normally.

4. The control time of pulse width is too long, the coil is electrified for a long time, resulting in electromagnetic memory phenomenon, which makes the push rod in the electromagnetic pilot valve unable to be dethroned, the diaphragm unable to be reopened, the remaining pressure in the air bag is too low, and the air supply is seriously insufficient.

5. The pulse gap is too frequent and the volume of the air bag is too small, which causes the remaining pressure in the air bag after injection to be too low, and the air supply pressure is seriously insufficient. The last several valves of each air bag cannot be removed and leak.

Main dimension of Turbo Pulse Valve Diaphragm Kit:

Details display of Repair Kit Diaphragm For Turbo Valve:

Available Models of Diaphragm Valve Repair Kits For Turbo Pulse Valves:

Tips: The related solenoid coils and armature assembly are all supplied.

YouTube video of Diaphragm Repair Kit For 3/4'' & 1'' Turbo Pulse Valve:

Factory Production Pictures of Solenoid Valve Diaphragm Kits:

The diaphragm consists of one or more layers coated on both sides. Diaphragms of different materials can be manufactured according to the requirements of use. The working temperature and pressure range of the diaphragm itself depends on the type of rubber, fabric and structure. The diaphragm can work at -10~80℃, 0.4~0.8 MPa, and the fluororubber and silicone rubber diaphragm can work at -80~232℃.

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on