Pu Fine Screen
Polyurethane Fine Screen specifically for wet materials ,Such as:
screens for high frequency screening of pulp. Mainly used in coal,
iron ore, phosphate, feldspar, garnet, gypsum, kaolin, aluminum
slag, lead, copper, tin, tungsten, titanium, and other materials...
The screen has good wear resistance, long service life, small
maintenance workload, and is not easy to damage. It can greatly
reduce maintenance and loss of production and maintenance. The
polyurethane fine screen works under the condition of water as the
medium, friction coefficient with the material was reduced, which
is more conducive through screening, improv screening efficiency,
and can avoid the adhesion of wet particles. At the same time,
because the lower friction coefficient , the friction was reduced,
result in service life was increased.
Polyurethane Fine Screen has high opening rate, good precision of
slot aperture, excellent wear resistance performance, high
classification efficiency, saving the energy and cost involved
obviously. The common sizes
are1045*700,1220*2320,1000*2320,1240*840,etc. The apertures
available are
0.063mm,0.075mm,0.10mm,0.12mm,0.15mm,0.18mm,0.20mm,0.23mm,0.25mm,0.30mm,0.35mm,0.40mm,0.50mm,0.60mm,0.70mm,0.80mm,0.85mm,1.00mm
,1.20mm, 1.50mm.
Features:
Opening rate reaches 32%, high screening efficiency and large
processing capacity;
The screen was formed at one time, the fibers are reinforced, and
the surface of screens will not sag and overall cracking;
Screens use cone hole design, which is conducive to the passage of
materials and not easy to clogging the holes;
Production time 2 months for customized special size , short
delivery time.
