High Quality Cone Crusher Parts Bronze Drive Shaft Bushing On Sale
Product description
Product Name: eccentric bush of Simmons cone crusher
Application: cone crusher
Service: provide drawings or sample processing
OEM: OEM available
Explain:
Simons cone crusher eccentric bearing pad type bearing, floating
sliding bearing. The inner copper sleeve is a straight sleeve, with
large gear components, general wear is not much, and the total
clearance is less than 5mm. A set of copper large gear assembly in
the cone, with dynamic cone shaft inserted, small clearance of
about 3mm and clearance of about 8mm, can be measured with coarse
fuse during assembly. The wear of cup-shaped copper tile and
dynamic cone ball will affect the clearance, and the track of the
moving cone is determined by it.
Advantages:
● use 99.99% contend of Copper, Zinc, Lead, Aluminum, etc.raw
material
● advanced sand casting, metal casting and centrifugal casting
processing method
● high wear resistance flanged bronze bearing bushing
● strictly control quanlity, making tolerance not more than 0.05mm
● component detection:sample test or Spectrum Detector instrument
test or authoried third party test
Specification
Type | Crushing awl Diameter(mm) | Maxfeeding size(mm) | Discharging port Width(mm) | Capacity(t/h) | Motor Power(kw) | Main axle swinging times |
| PYB | 600 | 600 | 65 | 12-25 | 20-40 | 30 | 356 |
| PYD | | | 35 | 3-13 | 12-23 | | |
| PYB | 900 | 900 | 115 | 15-50 | 50-90 | 5 | 33 |
| PYZ | | | 60 | 5-20 | 20-65 | | |
| PYD | | | 50 | 3-13 | 15-50 | | |
| PYB | 1200 | 1200 | 145 | 20-50 | 110-168 | 110 | 300 |
| PYZ | | | 100 | 8-25 | 42-135 | | |
| PYD | | | 50 | 3-15 | 18-105 | | |
| PYB | 1750 | 1750 | 215 | 25-60 | 280-480 | 160 | 245 |
| PYZ | | | 185 | 10-30 | 115-320 | | |
| PYD | | | 85 | 5-15 | 75-230 | | |
| PYB | 2200 | 2200 | 300 | 30-60 | 59-1000 | 280-260 | 220 |
We use centrifugal casting and sand casting machines manufacture
the symons cone crusher bronze bushing. The material is standard
C93800 (SAE 67). Also we have the advanced CNC lathe to machine
them. These parts are defect free with smooth surface. So our parts
can supply long working life and reduce your replace cost, use cost
and purchase cost. The prices are competitive too. And we can
supply the customized parts to fit or repair your machines with
your drawings.
Instructions for inquiry:
1. Drawing: you only need to provide one of the drawing, drawing
number, sketch and sample. (these are the premise of our service to
you, and also the important standard to facilitate your acceptance
of the workpiece after we do it well, so you must provide.)
2. Quantity: you need to customize the number of artifacts. (the
more quantity, the more favorable price
3. Material: the material requirements of the workpiece; (is it a
national standard or an enterprise standard or an export American
Standard, please indicate that these will affect the price to a
great extent!)
4.Duration: This is also an important information. If you need it
urgently, it will increase the manufacturing cost. Generally, the
manufacturing cycle of castings is 8 days.
