∅3*80 Mm Raw Material Tungsten Carbide Rods Cutting Tools For
Milling Inserts
Zhuzhou mingri cemented carbide co.ltd was established in 2001, May in zhuzhou city ,Hunan province
,China . Near 20 years of experience of manufacture of tungsten
carbide products such as tungsten carbide
dies,strips,plates,cutter,inserts,HPGR button stud ,slitting round
knives for corrugated paper cutting and so on .
Application
Tungsten carbide rods are mostly applied for end mill and drill
with sub-micron grain grade YL10.2 ,for non-ferrous precision
cutting and wood cutting with sub-micron grain grade YG6X,and for
fibreglass reinforced plastics,titanium alloys,hardened steel with
ultra-fine grain grade YG8X,ECT. It maintains features as stable
mechanical properties, easy to welding, high wear-resisting, etc.
All of our tungsten Carbide Products are made from the high-purity
Original/Virgin Raw Materials and HIP/Sintered, be of very high
quality and excellent performances.
| Grades | D(g/cm3) | HRA | ≥ N/mm2 |
| YL10.2 | 14.45 | 91.8 | 3000 |
| YU06 | 14.7 | 2050 | 3000 |
| YU08 | 14.56 | 1900 | 4000 |
| YU12 | 14.05 | 1750 | 4000
|
Production
1, After confirm order, carbide thread boring rods products will
start to prepare the RTP powder as per customer’s requirement with
our wet-grinding machine
2, Before mass production, we need to do a trial pressing and
sintering using every mould, and we check the appearances and the
sizes of carbide thread boring rods samples with micrometer, projectors etc. to ensure that the
requirements of the drawings can be met before batch production
3, Bulk production ,press the raw materials to shape blanks,and
carbide thread boring rods blanks must be passed by semi finished
inspection,
4, Then sinter blanks to finish (HIP) and finished products
inspection, we have 10 sets of vacuum sintering furnace and 2 sets
of HIP in the factory ensure the best quality and production
capacity.
5, 1). cleaning/tumbling is to make the carbide thread boring rods
look more beautiful.
2).The carbide thread boring rods can be ground according to
customers’ order tolerance requirement
6. All products will be packed well to avoid any loss when shipping
.All cartons will be required to put plastic film covered outside
the carton box.
Packing
step 1, wrapped carbide thread boring rods in paper to avoid
carbide thread boring rods to broke
step 2, put the carbide thread boring rods in inner small carton
box
step 3, put the inner box into outter carton and fill the carton
with foamed plastic
step 4, wrap the carton with packaging tape
step 5, you can choose any delivery way such as DHL,TNT,UPS ect.
Service
24 hour fast reply and contact our email : mr009@mrcarbide.com
whatsapp/wechat : 008618593402651
Welcome any inquiry about tungsten carbide products ,We can offer
you factory price directly and good quality control guarantee.
