Nationstar gold wire outdoor P10 waterproof Cabinet Fixed
installation video wall Advertising LED display
1, P10 1R1G1B led display, with 10000dots/sqm, which guarantee
vivid and clear image effection.
2, Cabinets with Protection grade IP65 front and IP54 rear, suitable for all
outdoor working environment.
3, Backside maintenance. Exterior exposed module screws, easy
dismantling.
4, Waterproof connectors, safe and steady.
5, Energy saving, each square meter average power consumption is
only 250W.
This is 1/2 scan P10 SMD led display, its brightness is around
5000cd/sqm. If you need higher brightness, we also have 1/4 scan P10 SMD led display and P10 DIP Led display.
♦ Technical specification
| outdoor SMD P10 |
| Resolution/mm | 10 |
| Pixel configuration | 1R1G1B |
| Pixel density/pixels/m² | 10000/m² |
| Module resolution | 16x16 |
| Module size/mm | 160x160 |
| View distance | 4-250m |
| Single point brightness adjust | Can be added |
| Single point color adjust | Can be added |
| White balance brightness | >8000cd/㎡ |
| Color temperature | 6500K-9500K |
| Horizontal view angle | 120(degrees) |
| Vertical view angle | 60(degrees) |
| Signal Process bit | 10 or 16bit |
| Grey process | 1024x1024x1024 16834x16834x16834 65536x65536x65536 |
| Control distances | Internet cable:100m, multimembrane:500m, monofilm:2km |
| Driving mode | Constant driving current |
| Scanning mode | (1/4) |
| Frame rate | 60Hz |
| Refresh frequency | >3000Hz |
| Control mode | Computer synchronous |
| Brightness adjusted range | Manual, automatic operation, stepless continuous adjusted 255 steps. No grey loss |
| Out of control point | <1/10000 |
| Working hours | ≥72hours |
| Mean Time Between Failure | >5000hours |
| Life time | 100000hours |
| Life-all-white(brightness halving) | 50000hours |
| Environment temperature range | Operating temperature range: -20-45℃ |
| Maximum power:/㎡ | <950W |
| Average power:/㎡ | <350W |
| Self-check technology | LED spot self-check, communications check, power check, temperature monitor(need customization) |
| Remote monitoring | Remote supervision and control, record potential fault, send out warning signs to the operators.(need customization) |
| Software environment | WindowsNT,Windows1999,WindowsXP |
| Luminous point width between centres | Deviation<3% |
| Brightness uniformity | <10% |
| Color uniformity(chromaticity coordinate) | ±0.003 |
| Power supply request | AC85-264V(50Hz-60Hz) |
| Contrast | (1000:1) |
| System protection | Moistureproof,dustproof,high temperature
protection,anti-corrosion,anti-burning,anti-static,anti-vibration |
| Humidity(working) | working:10-95% |
| Humidity(storing) | storing:10-95% |
Our case
♦ Production process:
1) Incoming Inspection→2)SMD→3)Plug-in
→4) Wave Soldering→5)After Welding→6)Testing
→7) Semi Finished Aging→8)Module Assembly
→9) Gluing→10)Finished Aging→11)Detection Finishing Warehousing
♦ Packaging and shipping
Wooden case or flight case package are available.
Shipping by sea,air or DHL,multiple shipping ways for your choice.
♦ Why choose us:
Continues Quality
With more than 10 years experience in led display
producing,equipments are updated regularly.What’s
more,unique standardized and module production ensure our products
continuous quality.
Competitive Price
With large scale production capacity and professional production
technology,our company have built
effective modular production.We always stick to promote the
technical innovation and reduce cost to
benefit customers.
Fast Delivery
Once we promise the delivery date,we will try our best to fulfill
it.Special procedures such as emergency
inventory will be used to maintain your uninterrupted supply of the
products.
Perfect Service
Pre-sales:Your purchasing requirements will be highly valued and
we’ll recommend suitable products to
you.
After-sales:We will track the products usage and then constantly
perfect our products.
FAQ
1)Training after order
After the order is placed, a processional training will be offered,
including software use, operate safety,
maintain equipment
2) Installation and debugging
Wecould send professionals to conduct on site installation and
debugging in strict accordance with therequirements of the schemes and original manual.
3) Warranty
Warranty: 3 years warranty, lifetime maintenance
Equip with free spare parts. The first 2 years after shipment, we
will be responsible for free maintenance
if any problem causedby quality itself. While you should take the
cost of the freight to us. After 2 years,
service is still available, but would charge for labor, material
and freight cost that generates.
4) Maintenance
Maintenance principles: response in time, solve problems asap and
ensure the use.
Maintenance period: In the maintenance period of the led display
body, free of all maintenance charges
After maintenance period, only charge the material cost and labor
cost.
FAQ
Q1:LED display models are generally expressed in such as P2 P3
P4.....P8, P10, what does this mean?
A: P3 P4.....P8,P10 means that the pixel pitch is 3mm 4mm....10mm,
which determines resolution of a display .Pixel pitch is smaller,
led display resolution is higher.
Q2:What pixel pitch should I choose on my display?
A:Using the SCX screen, it is determined mainly by the viewing
distance, the size of the display screen, the desired effect and
the customer budget.
Q3: To order a display ,What kind of information do I have to offer
you?
A:You should provide width/height of the display, the main use, the
viewing distance, the scene photos, special requirements,then I can
provide you with a detailed list of quotations.
Q4:How to install?
A:Free of charge to provide detailed steel structure drawings and
installation guidance and wiring diagram,
free remote debugging. We can also send our engineers to the site
to guide the installation if needed.
Q5:What about the warranty?
A:Two year warranty
