RIXIN Brand Cement Grinding Rock Crushing HPGR Tungsten Carbide
Studs
Desciption of carbide cement grinding studs
1. Corner with arc transition, to avoid the damage during production,
transportation, installation, and using procedure.
2. HIP sintered, good product density and high strength.
3. Apply special technology to relieve stress of product surface
after processing, at the same time improved surface hardness.
4. Product surface coated with a layer of grease to avoid oxidation.
Manufacturer Wholesale Tungsten Carbide Stud Pins For Grinding
Rolls
| Grade | MR18 |
| Hardness (HRA) | 86.8 |
| Density (g/cm3) | 13.72 |
| T.R.S (N/MM2) | 3000 |
| other grades may be offered by customers'requirement |
| H | Ф | Approx Weight (g) |
| 50 | 16 | 137 |
| 45 | 18 | 156 |
| 40 | 20 | 172 |
| 40 | 16 | 108 |
| 35 | 20 | 150 |
Remark:
1. dimension refers to sketh
2. customize for client's requirement is available
3. fully angular differs from different models
Application of tungsten carbide studs
1, Grinding bulk material
2, As pre grinding equipment before ball mill
3, or form complex grinding system with ball mill in the field of
mineral separation
4, HPGR cemented carbide studs widely used in grinding cement clinker,limestone,bauxite,iron ore.
Packing&Delivery of tungsten carbide studs
Packing Details: Inner: Paper box / Plastic box；Outter: Cartons Box
/ Wooden case
Delivery Time: Generally it is 3-5 days if the carbide studs are in stock
It is 20-25 days if carbide studs are not in stock, according to
quantity
