High Pressure Respirator Breathing Machine Electrical Control
Introduction
ventilator is an electrically controlled pneumatic ventilator
integrating such functions as time, volume cycling, pressure limit,
etc. It is mainly intended for providing ventilation support to a
critically ill patient during the life threatening phase and
ensuring the going-through of the dangerous period by the patient
and smooth treatment of primary diseases for recovery. Also it
provides an alternation in case of irreversible lesions in
respiratory muscles or irreversible damage to upper airway to
maintain the respiratory function of the patient, and also provides
ventilation assistance for the patient during the recovery from a
disease or operation.
Parameters
| TECHNIQUES SPECIFICATIONS |
| Physical specifications |
| Display | LED Display |
| Mode: | pneumatically powered and electrically controlled system |
| Trolley: | Fitted with 4 nos anti-static rubber castors; two of which are
lockable for braking and easy maneuverability with foot operated
brake provisions |
| Technical Specifications: |
| Gas requirement: | Medical oxygen with a pressure ranging from 280~600kpa |
| safety valve | <12.5 kPa |
| Respiratory Rate | 6~60 times/ min |
| Oxygen concentration output | <50% |
| minute volume | ≥18L |
| modes of ventilation | A/C, IPPV, SIPPV, IMV, SIMV, PEET. MANUAL, SIGH |
| PEEP: | 0.1 ~ 1.0 kPa |
| Ptr: | -4 ~ 10 hPa |
| IMV frequency: | 1~12 bpm |
| I/E Ratio: | 1:1.5; 1:2.0; 1:2.5; 1:3.0 |
| Tidal Volume | Not less than 50~ 1200ml |
| Inspiratory Plateau: | 0~1s |
| Maximum Safety Pressure | ≤ 6.0kPa |
| Sigh: | one deep breath per 80 controlled respirations, the inspiration
time is 1.5 times of the setting point |
| Pressure limit range: | 0 ~ 6.0 kPa |
| Airway pressure alarm: Audible and visual and with yellow and red
color indicating | Lower: 0.9 kPa ~ 5.4 kPa; Upper: 0.5 kPa |
| ±0.2 kPa |
| Ventilation Volume alarm: | ≥ 18L/ MIN |
| Power Supply Alarm | Ac/dc power supply are after failing to send out alarm immediately
Alarm Time: keep >120s |
| The airway pressure continues to be higher than 15 hPa ±1 hPa for
15s±1s, then the machine will raise an audible alarm, the pressure
will be displayed in red and the continuous high pressure red alarm
wording is displayed on the screen of the anesthetic respirator. |
| Operating conditions |
| Ambient temperature: | 10 ~ 40oC |
| Relative humidity: | no higher than 80 % |
| Atmospheric pressure: | 860 hPa ~ 1060 hPa |
| Power requirement: | 100-120 Vac, 50/60 Hz; |
| Attention: the AC power supply used for the ICU ventilator must be
well grounded. |
| Storage |
| Ambient temperature: | -15oC ~ +50oC |
| Relative humidity: | no higher than 95 % |
| Atmospheric pressure: | 86 kPa ~ 106 kPa. |
| It should be stored in a room without corrosive gas and well
ventilated |
| Package |
| packaging box | comply with the requirement of GB/T 15464 |
| Between the packaging box and product, soft material with
appropriate thickness provided to prevent loosening and mutual
friction during transportation |
| Moisture protection and rain protection to ensure that product is
protected from natural damage. |
| Safty & Alarm |
| Gas source pressure | Immediate alarm; “high level alarm” indicator flickers raising an
audible alarm. |
| Airway Pressure Alarm | The airway pressure exceeds 15hpa. The maximum delay is no longer
than 17s. The “high level alarm” indicator flickers raising an
audible alarm. |
| Tidal Volume Alarm | Lower than 50ml, The alarm will be raised after one breathing
cycle. |
| Ventilation Volume Alarm | Lower: 0~12L/Min; Up: 18L/ Min |
| Battery Voltage Alarm | It alrms when the battery voltage is lower than 10.5V. |
| Power On Self Test | Self test before working, assure it's working normally. |
| STANDARD CONFIGURATIONS |
| QTY | NAME |
| 1 set | Main unit |
| 1 set | Oxygen tube |
| 2 set | Silicone Mask |
| 1 pc | Power line |
| 2 pcs | Threaded pipe |
| 2 pcs | Standard Pipe |
| 1 set | Oxygen Reducer |
| 1 set | Humidifier |
| 1 pc | Battery |
| 1 set | flow sensor |
| 2 pcs | A leather bag ( Blue) |
| 1 set | Tools with the machine |
| 1 set | User Manual (English Version) |
FAQ
1, How to make sure your payment safe?
We will send the proforma invoice with our company bank information
by email,and we will also verify bank information by whatsapp,
viber, phone and other ways.
2, How can you get quotation quickly?
You can contact us by whatsapp, skype, viber or phone and we will
response you within several minutes . Email is not he best choice
because of its low interaction.
and we will response your email within 24 hours.
3, Why do you choose us?
We help many clinics, hospitals, lab rooms and vet clinics to find
cost-efficient equipment.
We cooperate with various medical equipment factories, and offer
best price and quality products for you.
We can provide one-stop service for a new clinic, hospital, lab
room and vet clinic.
We can help you save time, save money and save your energy to buy
the best medical equipment in China.
4, How about the package and shipping?
Our products are all packed by strong exporting wooden and carton
package,and we have our own experienced agents to ship for you.
We will update the shipping conditions for you,also help clear your
customs when it arrives. We will care your goods until you get your
product and use it successfully.
5, How about warranty?
We offer one or two years warranty according to different products.
During warranty, if your machine was broken,we will send the broken
parts to you freely,and our engineer will teach you how to repair
the product.
When you can't repair that by yourself,we will send engineer to
your country, or you can send back the machine.
