1.Solar powered,saving energy and protecting environment,
installing conveniently,.
2.Standalone power supply, lighting automatically at night or rainy
day, warning effect is obvious.
3.Imported silicon wafer, stable performance, high conversion
efficiency.
4.Long service Lifespan:Work more than 3 years normally.
5. Long working time:It can work over 72 hours in the foggy or rainy days after
fully charged at 8 hours.
6.High quality and really good factory price.
Application
1.Mainly used for tunnel,turnoff.
2.school gate,accident-prone highway or bend.
3.Foggy area (seaside,airport area), highway or non-street light
area.
4.The ramp , curve or some dangerous roads.
Solar road stud installation is not a complicated matter, but there
are many details that require attention. These details play an
important role in ensuring the quality and service life of spike.
1. This is most important, please placed in isolation facilities installation safety first, then
everyone should be in the safe facility when installing.
2. Determine the installing location. To ensure the installing
location is smooth, should level scalable, craks, uneven pavement
first, also please be sure the solar panel is being shined by
sunlight .
3. To ensure the installing location dry, should clean up it with
the brush,
4. Evenly apply appropriate glue on the spike;
5. Firmly press the spike on the installation location with right
direction, if the glue is more, please must clean it up;
6. If it is aluminum alloy with pillar, the hole depth must be 1cm
deeper than the pillar, hole diameter must be 2mm larger than
pillar diameter.
7. After installing, please check it every 2h, to ensure that all
the spikes are installed at the right direction and good condition.
8. After the glue curing for 4 hours, removed installation
isolation facilities.
