Vetical Centrifugal Solid Liquid Separator / Water Well Sand
Separator
Centrifugal Solid Liquid Separator Working principle
It can separate rapid succession of solid liquid and liquid liquid
,which is a kind of vertical centrifuge.
A rotary drum is install in the upper end of vertical shaft, the
driving device driven by a motor to rotate
at high speed. Drum have a set of a butterfly shaped parts mutually
overlapped together.
Have a very small space left between the disc and disc. Suspension
pour intodrum by feeding tube
which is located center of the drum.When the slurry flows past the
clearance between the disc, solid particles in centrifuge sinking
to the sediment is formed on the disc. Sediment falls of the disc
along
the sliding surface of the disc and accumulate in the drum at the
largest diameter.
The separation of the liquid exhaust drum from the liquid outlet
.The function of the disc is to short
the distance between the settlement of solid particles or liquid
droplets and to expand the area of settlement of the drum.Because
the installation disc in the drum and greatly improves the
separators’ production capacity.
Centrifugal Solid Liquid Separator Application:
The disc separator is specially used for the two-phase and
three-phase separation. The two-phase separation is to separate the
suspended solid from liquid or separate two liquids which have the
different specific gravity and are immiscible. The three-phase
separation is to separate the two immiscible liquid phases and a
phase of solid at the same time.
Solid-liquid separation
Liquid-Liquid separation
Liquid-Liquid-Solid Separation
Centrifugal Solid Liquid Separator advantage:
1, High rotating speed
2, Operating stability
3, Completely sealed up of the inlet and outlet system
