3 Phase Induction Motor
MS series three-phase asynchronous motor is a Y series motor. The
upgrading of product is the enclosed, fan-cooled induction motor
for general purpose.
The product applies to economic lake-off fields, such as machine
tools, water pumps, fans, compressors, also can be applied to
transportation, stirring, printing, agricultural machinery, food,
and other kinds of excluding flammable, explosive, or corrosive
gas.
MS series three-phase asynchronous motor installation size and
power grade in conformity with relevant standards of IEC, its shell
protection grade for IP54, a cooling method for IC41l, operate
continuously (S1). It uses F insulation class and grade B
assessment according to temperature (except for 315 L2-2, 4355 all
specifications F grade the assessment and ask the assessment load
noise index.
MS series three-phase asynchronous motor the rated voltage is 380
V. rated frequency is 50 Hz. 3 KW, the following connection is Y;
other powers are delta connections. Motor running the place at no more than 1000 m;
Environment air temperature changes with seasons, but no more than
40 °C; Minimum environment air temperature is-15 °C; The wet month average high relative humidity is 90%; At the same
time, this month is not higher than the lowest average temperature
25 °C.
Ambient temperature: -15 degrees centigrade ~40 degrees centigrade
Altitude: not more than 1000 meters
Rated voltage: 380V, 400V, 415V, 660V
Rated power: 50HZ, 60HZ
Connection: the rated power is 3KW, and the following motor is Y
connected. The rated power is 4KW, and the motor is a triangular
connection.
Working system: continuous working system (S1)
Protection grade: IP54/IP55
Insulation grade: F grade
Center height of the seat: 80mm-400mm
Product weight: 70Kg-700Kg
