20mA Digital Signal Isolator
Signal Isolator Current/Voltage Signal 0-5V or 4-20mA Isolator
Input
Input signal: 4-20mA; 0-20mA
Distribution voltage: 24V, (maximum drive current 30mA)
Input impedance: ≤50Ω
Output
Output signal: 4-20mA; 0-20mA; 0-5V; 0-10V
Output load resistance: RL≤500Ω (when output is current signal);
RL≥10KΩ (when output is voltage signal)
Basic parameters
Power supply: DC24V, ± 10%
Current consumption: ≤50mA (one input and one output, 24V power
supply, power distribution input, 20mA output); ≤70mA (one input
and two output, 24V power supply, power distribution input, 20mA
output)
Temperature drift: 0.005% F.S. / degree (-20 degrees ~ +55 degrees)
Response time: ≤10mS (0-90%) (TYP)
Insulation strength: 1500V AC / 1min (between input, output, power
supply)
Insulation resistance: ≥100MΩ (between input, output, power supply)
Operating temperature range: -20 ~ +55 degrees
Electromagnetic compatibility: Comply with GB / T 18268
(IEC61326-1)
Applicable field equipment: two-wire system, three-wire system
transmitter; current source
| Parameter |
| THT-IP | X | X | X | marks |
| Configuration | 1 | | | 1 input 1 output |
| 2 | | | 1 input 2 output |
| Input signal | 1 | | 4-20mA |
| 2 | | 0-20mA |
| 3 | | 0-10mA |
| Output signal | 1 | 4-20mA |
| 2 | 0-20mA |
| 4 | 0-5V |
| 6 | 0-10V |
| Please indicate your required input type and output type when place
order |
