LDC Display Industrial Flow Meter Battery Operated Hot Water
Turbine Flow Metre
1. Introduction
LWGYML series intelligent liquid turbine Flowmeter is a new type of
intelligent instrument with the integration of turbine flow sensor
and display accumulation developed by advanced ultra-low power
consumption single-chip microcomputer technology. it has the
advantages of compact mechanism, intuitive and clear reading, high
reliability, no interference from external power supply,
anti-lightning strike, low cost and so on.
It is widely used in the sealed pipelines which doesn’t have
corrosion function on SS 1Cr18Ni9Ti, 2Cr13, corundum Al2O3 and cemented carbide and have no fiber, particle and so on. The
liquid should be less than 5*10-6m2/s with viscosity under working temperature, if the viscosity of
the liquid is more than 5*10-6m2/s, then the flow meter can be used after calibration. If it is
equipped with other display devices with special functions, it can
also do quantity control, excessive alarm and so on. It is really
perfect in flow measurement and energy
conservation.
2. Features
- High accuracy, usually reach ±1%R,±0.5%R,or even reach ±0.2%R for
high-precision type.
- Good repeatability, it can reach 0.05%-0.2% in short term, if
regular calibration or online calibration can get an extremely high
accuracy, so it is preferred in foreign trade.
- Pulse signal output, it is suitable for totalizer measurement and
computer connection, no zero drift,strong capacity of resisting
disturbance.
- High frequency signal(3-4KHz), strong signal resolution.
- Wide range, middle and big diameter can reach 1:20, and small
diameter can reach 1:10.
- Compact structure, easy installation and maintenance.
3. Working Principle
Working principle of turbine flowmeter: the fluid flows through the
sensor housing. Because the impeller blades have a certain angle
with the flow direction, the impulse force of the fluid makes the
blades have a rotating moment. After overcoming the friction moment
and fluid resistance, the blades rotate. After the moment is
balanced, the rotating speed is stable. Under certain conditions,
the rotating speed is directly proportional to the flow velocity.
Because the blades have magnetic conductivity, they are in the
magnetic field of the signal detector (composed of permanent
magnetic steel and coils), and the rotating blades cut magnetic
lines. The magnetic flux of the coil is changed periodically, so
that the electric pulse signal is induced at both ends of the coil.
This signal is amplified and shaped by an amplifier to form a
continuous rectangular pulse wave with a certain amplitude, which
can be transmitted to the display instrument remotely to display
the instantaneous flow rate and accumulated amount of fluid.
4. Specifications
Pipeline Diameter(mm)
and
Connection | 4,6,10,15,20,25,32,40
Thread Connection |
(15,20,25,32,40) 50,65,80,100,125,150,200
Flange Connection |
| Accuracy | ±1%R,±0.5%R,±0.2%R(Special Order) |
| Turn Down Ratio | 10:1; 15:1; 20:1 |
| Material | 304SS,316(L)SS, etc |
| Medium Temperature | -20℃~+110℃ |
| Environmental Conditions | Temperature: -10℃~+55℃
Relative humidity: 5%~90%
Atmospheric pressure: 86~106KPa |
| Power supply | Sensor:+12VDC,+24VDC(Option)
Transmitter:+24VDC
Local Display:3.2V Lithium Battery |
| Output Signal | Sensor:Pulse Frequency Signal(Low level≤0.8V, High level≥8V)
Transmitter:Two Wired 4-20mA Current Signal |
| Signal Cable | STVPV 3x0.3(Three Wired),2x0.3(Two Wired) |
| Signal Cable Connection | Houseman Connector(Standard Type)
Inner Thread M20x1.5(Explosion Type) |
| Transmission Distance | ≤1000m |
| Explosion Proof | None(Standard Type)
EXdIIBT6(Explosion Proof) |
| Protection Class | IP65 |
5. Flow Range & Work Pressure
| Pipeline Diameter | Normal Flow Range
(m³/h) | Extended Flow Range
(m³/h) | Normal Pressure
(MPa) | Pressure Rate(MPa)
(Flange Connection) |
| DN4 | 0.04~0.25 | 0.04~0.40 | 6.3 | 12,16,25 |
| DN6 | 0.10~0.60 | 0.06~0.60 | 6.3 | 12,16,25 |
| DN10 | 0.20~1.20 | 0.15~1.50 | 6.3 | 12,16,25 |
| DN15 | 0.60~6.00 | 0.40~8.00 | 6.3,2.5
(Flange Connection) | 4.0,6.3,12,16,25 |
| DN20 | 0.80~8.00 | 0.45~9.00 | 6.3,2.5
(Flange Connection) | 4.0,6.3,12,16,25 |
| DN25 | 1.00~10.00 | 0.50~10.00 | 6.3,2.5
(Flange Connection) | 4.0,6.3,12,16,25 |
| DN32 | 1.50~15.00 | 0.80~15.00 | 6.3,2.5
(Flange Connection) | 4.0,6.3,12,16,25 |
| DN40 | 2.00~20.00 | 1.00~20.00 | 6.3,2.5
(Flange Connection) | 4.0,6.3,12,16,25 |
| DN50 | 4.00~40.00 | 2.00~~40.00 | 2.5 | 4.0,6.3,12,16,25 |
| DN65 | 7.00~70.00 | 4.00~70.00 | 2.5 | 4.0,6.3,12,16,25 |
| DN80 | 10.00~100.00 | 5.00~100.00 | 2.5 | 4.0,6.3,12,16,25 |
| DN100 | 20.00~200.00 | 10.00~200.00 | 1.6 | 4.0,6.3,12,16,25 |
| DN125 | 25.00~250.00 | 13.00~250.00 | 1.6 | 2.5,4.0,6.3,12,16 |
| DN150 | 30.00~300.00 | 15.00~300.00 | 1.6 | 2.5,4.0,6.3,12,16 |
| DN200 | 80.00~800.00 | 40.00~800.00 | 1.6 | 2.5,4.0,6.3,12,16 |
6. Configuration
| LWGYML Series Turbine Flow Meter Configuration |
| Model | LWGYML |
| Pipe Material | 4 | 4mm |
| 6 | 6mm |
| 10 | 10mm |
| ...... | |
| 200 | 200mm |
| Model Description | N | No Display,12VDC Power Supply,Pulse Output, High Level≥8V Low
Level≤0.8V |
| A | No Display,4-20mA 2 Wired Current Output |
| B | Local Display,Battery Operated |
| C | Local Display,4-20mA 2 Wired Current Output |
| C1 | Local Display,RS485 Output |
| C2 | Local Display, HART Output |
| Accuracy | 05 | 0.5 Grade |
| 10 | 1.0 Grade |
| Turbine Type | W | Extended Ratio |
| S | Standard Ratio |
| Material | S | SS 304 |
| I | SS 316(L) |
| Explosion Proof | N | None |
| E | Explosion Type(ExmIICT6 or ExdIIBT6) |
| Pressure Rate | N | Normal Pressure |
| H | High Pressure |
| Connection Type | T | Thread Connection |
| F | Flange Connection |
| Filter | N | None |
| F | With Filter |
7. Product Details
