Intelligent Alcohol Turbine Flow Metre Pulse Output -20℃~+110℃
Medium Temperature
1. Introduction
LWGYML series turbine flow meter is a new generation kind of flow
meter that absorbs the advanced technologies of flow meter at home
and abroad. It has been optimized and designed to have so many
characteristics, such as simple structure, light weight, high
precision, good repeatability,easy installation and usage.
2. Features
- High accuracy, usually reach ±1%R,±0.5%R,or even reach ±0.2%R for
high-precision type.
- Good repeatability, it can reach 0.05%-0.2% in short term, if
regular calibration or online calibration can get an extremely high
accuracy, so it is preferred in foreign trade.
- Pulse signal output, it is suitable for totalizer measurement and
computer connection, no zero drift,strong capacity of resisting
disturbance.
- High frequency signal(3-4KHz), strong signal resolution.
- Wide range, middle and big diameter can reach 1:20, and small
diameter can reach 1:10.
- Compact structure, easy installation and maintenance.
3. Application
Turbine flowmeter is widely used in the following measurement
objects: petroleum, organic liquid, inorganic liquid, liquefied
gas, natural gas, gas and cryogenic fluid. It is widely used in
foreign LPG, refined oil and light crude oil transfer and gathering
stations, as well as in the initial and terminal stations of large
crude oil pipelines for trade settlement. In Europe and the United
States, turbine flowmeter is second only to orifice flowmeter for
natural gas metering. Holland alone has adopted more than 2600 gas
turbine flowmeters with various sizes and pressures ranging from
0.8MPa to 6.5MPa on natural gas pipelines. They have become
excellent natural gas flow meters. Although the excellent metering
characteristics of turbine flowmeter are favored by people, it
gives the impression that it is composed of moving parts with short
service life, which makes it hesitant to select it. After
unremitting efforts, it should be said that the situation has been
greatly improved. As the most common flowmeter, turbine flowmeter
has been developed into a large scale of multi variety, full series
and multi specification batch production.
Turbine flowmeter is widely used in some special departments, such
as scientific research and experiment department, national defense
science and technology department and measurement department. The
use of these fields just avoids its weakness (not suitable for
long-term continuous use), and gives full play to its
characteristics (high precision, good repeatability, and can be
used in high pressure, high temperature, low temperature and micro
flow conditions). In these fields, most of them are designed
according to the special requirements of the tested object. They
are special instruments and do not carry out mass production.
4. Specifications
Pipeline Diameter(mm)
and
Connection | 4,6,10,15,20,25,32,40
Thread Connection |
(15,20,25,32,40) 50,65,80,100,125,150,200
Flange Connection |
| Accuracy | ±1%R,±0.5%R,±0.2%R(Special Order) |
| Turn Down Ratio | 10:1; 15:1; 20:1 |
| Material | 304SS,316(L)SS, etc |
| Medium Temperature | -20℃~+110℃ |
| Environmental Conditions | Temperature: -10℃~+55℃
Relative humidity: 5%~90%
Atmospheric pressure: 86~106KPa |
| Power supply | Sensor:+12VDC,+24VDC(Option)
Transmitter:+24VDC
Local Display:3.2V Lithium Battery |
| Output Signal | Sensor:Pulse Frequency Signal(Low level≤0.8V, High level≥8V)
Transmitter:Two Wired 4-20mA Current Signal |
| Signal Cable | STVPV 3x0.3(Three Wired),2x0.3(Two Wired) |
| Signal Cable Connection | Houseman Connector(Standard Type)
Inner Thread M20x1.5(Explosion Type) |
| Transmission Distance | ≤1000m |
| Explosion Proof | None(Standard Type)
EXdIIBT6(Explosion Proof) |
| Protection Class | IP65 |
5. Flow Range & Work Pressure
| Pipeline Diameter | Normal Flow Range
(m³/h) | Extended Flow Range
(m³/h) | Normal Pressure
(MPa) | Pressure Rate(MPa)
(Flange Connection) |
| DN4 | 0.04~0.25 | 0.04~0.40 | 6.3 | 12,16,25 |
| DN6 | 0.10~0.60 | 0.06~0.60 | 6.3 | 12,16,25 |
| DN10 | 0.20~1.20 | 0.15~1.50 | 6.3 | 12,16,25 |
| DN15 | 0.60~6.00 | 0.40~8.00 | 6.3,2.5
(Flange Connection) | 4.0,6.3,12,16,25 |
| DN20 | 0.80~8.00 | 0.45~9.00 | 6.3,2.5
(Flange Connection) | 4.0,6.3,12,16,25 |
| DN25 | 1.00~10.00 | 0.50~10.00 | 6.3,2.5
(Flange Connection) | 4.0,6.3,12,16,25 |
| DN32 | 1.50~15.00 | 0.80~15.00 | 6.3,2.5
(Flange Connection) | 4.0,6.3,12,16,25 |
| DN40 | 2.00~20.00 | 1.00~20.00 | 6.3,2.5
(Flange Connection) | 4.0,6.3,12,16,25 |
| DN50 | 4.00~40.00 | 2.00~~40.00 | 2.5 | 4.0,6.3,12,16,25 |
| DN65 | 7.00~70.00 | 4.00~70.00 | 2.5 | 4.0,6.3,12,16,25 |
| DN80 | 10.00~100.00 | 5.00~100.00 | 2.5 | 4.0,6.3,12,16,25 |
| DN100 | 20.00~200.00 | 10.00~200.00 | 1.6 | 4.0,6.3,12,16,25 |
| DN125 | 25.00~250.00 | 13.00~250.00 | 1.6 | 2.5,4.0,6.3,12,16 |
| DN150 | 30.00~300.00 | 15.00~300.00 | 1.6 | 2.5,4.0,6.3,12,16 |
| DN200 | 80.00~800.00 | 40.00~800.00 | 1.6 | 2.5,4.0,6.3,12,16 |
6. Configuration
| LWGYML Series Turbine Flow Meter Configuration |
| Model | LWGYML |
| Pipe Material | 4 | 4mm |
| 6 | 6mm |
| 10 | 10mm |
| ...... | |
| 200 | 200mm |
| Model Description | N | No Display,12VDC Power Supply,Pulse Output, High Level≥8V Low
Level≤0.8V |
| A | No Display,4-20mA 2 Wired Current Output |
| B | Local Display,Battery Operated |
| C | Local Display,4-20mA 2 Wired Current Output |
| C1 | Local Display,RS485 Output |
| C2 | Local Display, HART Output |
| Accuracy | 05 | 0.5 Grade |
| 10 | 1.0 Grade |
| Turbine Type | W | Extended Ratio |
| S | Standard Ratio |
| Material | S | SS 304 |
| I | SS 316(L) |
| Explosion Proof | N | None |
| E | Explosion Type(ExmIICT6 or ExdIIBT6) |
| Pressure Rate | N | Normal Pressure |
| H | High Pressure |
| Connection Type | T | Thread Connection |
| F | Flange Connection |
| Filter | N | None |
| F | With Filter |
