Anti-wind dust net:
Anti-wind dust net in Our company has full automatic punching
primary molding equipment,
electrostatic spraying equipment.Combined with years of experience
and technology in metal
electrostatic screen manufacturing,the technology of windscreen and
dust suppression has
been improved step by step.
What does a Anti-wind dust net do?
Anti-wind dust net in one place by deflecting it to another.The best windbreaks
produce
a zone behind the windbreak which will have wind of about a quarter
of the speed.
Windbreaks control the amount of "crashing down and in" by letting
a little wind flow through.
The wind flowing through holds the faster (deflected) wind away for a
few hundred feet. This
lets the winds merge together again more gently with less turbulence.
Anti-wind dust net standard quality:
1. good material
2. standard hole diameter,pitch size
3. flat surface
4. control the lowest tolerance range
5. long use life
6. save change time and low cost
Anti-wind dust net good quality material:
1). galvanized sheet
2). steel sheet
3). aluminium steel sheet
4). stainless steel sheet,SS304,316,316l etc
5). OEM for you.
Anti-wind dust net normal specification note:
Anti-wind dust net has a forming width of 825mm, a peak height of 50mm-80mm,a sheet
thickness of 0.5mm-2.5mm, and a length of 6m. At the same time, our
company can process
according to the drawings. Remind you that the wind-proof
dust-proof net does not exceed
6.15 meters. This is because the longer the three-peak wind-proof
dust-proof net, the farther
the steel components will be, and the wind-shielding effect will
not be obvious. Among them,
the three-peak wind-proof dust-proof net The best windproof effect
is 7.5cm in height.
Anti-wind dust net details:
Length: 1m-12m
Width: 300mm to 910mm
Thickness: 0.5mm to 1.5mm
Processing: Mould punching - cutting - edge trimming - leveling - cleaning
Hole size ranges: 0.8mm to 30mm round holes
Hole shapes: round diamond, hexagonal etc
Anti-wind dust net design color:
- green,blue
- yellow,ornage
- pink,red
- gray,white etc
Anti-wind dust net export in the world:
- vietnam
- USA
- spain
- france
- new zealand
- australia
- south africa etc
Anti wind dust fence good features:
1). Slow down wind power
2). Noise control
3). High strength
4). Long validity
5). Anti-rust and corrosion resistance
6). Dust suppression
7). Change the wind direction
8). Beautiful
Anti wind dust fence widely uses:
- steel,building materials, cement and other enterprises Dust
suppression in the stockyard; harsh
environment such - mainly used for wind and dust suppression of coal storage plants in
coal mines, coking plants,
power plants, etc.; - The dust suppression effect of the single-layer wind and dust
suppression wall can reach 65-85%,
and the effect of the double-layer wind - as crop wind protection, sand-proof weather and dust-proof;
- ports, dock coal storage plants and various stockyards;
- railway, highway coal-gathering station coal storage yard,
construction site, road dust, both sides
of the highway.
Anti wind dust fence specification list:
Anti wind dust fence specification
|
| Type | Forming width | Peak height | length | Sheet thickness |
| Three-peak(triplets) | 810mm-950mm | 60mm-70mm | 0.5m-10m | 0.5mm-2.0mm |
| material quality | Stainless steel | Galvanized | Aluminized zinc | Al Mg alloy |
| surface treatment | Electrostatic powder spraying |
| Table 1: Specifications of 4 Types of Windbreak Panels |
| Pattern | Width
(mm) | Peak Height
(mm) | Plated Thickness
(mm) |
| Single peak windbreak panel |
| 250–300 | 50–80 | 0.6–1.5 |
| 300–450 | 70–90 | 0.6–1.5 |
| 450–500 | 90 -100 | 0.6–1.5 |
| Twins peaks windbreak panel |
| 400–600 | 50–100 | 0.5–1.5 |
| 700–900 | 90–100 | 0.5–1.5 |
| Three peaks windbreak panel |
| 810–940 | 70 | 0.4–1.5 |
| Five peaks type anti-wind and dust board |
| 940 | 15, 20 | 0.6–1.5 |
Show our Anti wind dust fence pictures to you:
