The terminal module is wired, and there are other terminal modules
on the right and left.
A terminal module in the ET 200S distributed I/O system can only
be removed when there is a clearance of around 8 mm to the adjacent
terminal modules (you achieve this clearance by moving the adjacent
modules)
1. Switch off the supply voltage on the terminal module and, if
applicable, t
he power module
2. Disconnect the wiring on the terminal module
3. Removal from the right: Use a screwdriver to push the locking
mechanism on the previous terminal module/interface module (on the
left)
down until the mechanism stops, and move the terminal module to the
right
Removal from the left: Use a screwdriver to push the locking
mechanism
on the terminal module down until the mechanism stops, and move the
terminal module to the left.note:The locking mechanism is under the
terminal
module.
4. With the locking mechanism depressed, tip the terminal module so
that it
comes off the rail
Siemens is a global powerhouse focusing on the areas of
electrification,
automation and digitalization. One of the world’s largest producers
of
energy-efficient, resource-saving technologies, Siemens is a
leading
supplier of systems for power generation and transmission as well
as
medical diagnosis. In infrastructure and industry solutions the
company
plays a pioneering role
Siemens’ technical expertise, comprehensive portfolio and
long-standing
experience are helping to pioneer a sustainable future across the
globe.
Find detailed information, news, insights and references on the
topic areas
that exemplify Siemens’ success in providing state-of-the-art
solutions in
fields including IT, industry, finance and energy.
