High Filtration Pollution Protection Mask , Polypropylene Face Mask
Oem/Odm Available
CE FFP1 Save Mask , FFP1 Dust Mask , Disposable Face Mask,Non Woven
Fabric
1 . Descriptions
【High filtration】- High Technology Filters Almost 98% Of Airborne
Particles Dust, Germs, Seasonal Allergies, Smoke, Car Exhausted
Gas, PM 2.5 Pollution Ash.
【Designed for comfortable on-the-job protection】- Disposable Mask
Is Lightweight, Humidity-resistant, Latex-free, Adjustable Metal
Nose Strip And Comfortable Elastic Headband.
【Available 24/7】- Our Mask Can Be Used All Year In Any Weather
Which Keeps You Safe From Fog, Smog, Dust, Germs, Bacteria,
Viruses, Air Pollution, Allergens, And Humidity Thus Keeping You
Healthy And Safe From Many Diseases.
【Size】- One Size Fits Most; Universal Contoured Design Provides A
Snug Fit To Most Facial Profiles.
2 . Material of each layer
Outer layer : Protective pp spun-bonded non-woven
Middle layde : FFP1 melt blown filter(have filter efficiency level
of 80%)
Inner layer : Shaped needle punched cotton
3 . Mask CE Quality Standards
| CE Standard for Disposable Respirators |
| EN: 149:2001 + A1:2009 |
| Distinguish | Filter Efficiency | Penetration | Resistant |
| FFP1 NR | ≧80% | < 20% | < 21mmH2O |
| FFP2 NR | ≧94% | < 5% | < 24mmH2O |
| FFP3 NR | ≧99% | < 1% | < 30mmH2O |
1 . Stardard : EN : 149 : 2001 + A1 : 2009
2 . Test Machine : TSI 8130
3 . Test Flow : 95Liters/Min
4 . Test Medium : NACL & DOP
4 . Certification
This product has been tested according to the following European
Standard:
EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering
half masks to protect against particles. Requirements, testing,
marking.
It complies with European Regulation (EU) 2016/425 on Personal
Protective Equipment (PPE).Category III.
EU type examination certificate (module B) issued by BSI , notified
body n°0086.The PPE is subject to the conformity assessment procedure based on
internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under
surveillance of BSI , notified body n°0086.
5 . Directions for use
- The mask is for single use only.
- The mask should not be removed from its packaging until its
required for use.
- Use the respirator in accordance with applicable health and safety
regulations.
- Fit the respirator and check leak-tightness before entering the
contaminated area.
- Wear the respirator for the whole duration of exposure to
contaminants.It should not be used for more than 8 hours
continuously and should be discarded after use.
- Transport and stockage of unused masks should be such that the
product is not stored in direct sunlight and in frost free
conditions,not in contact with solvents and cannot be damaged by
physical contact with hard surfaces/items.
- As required by European Health and Safety requirements,the user is
advised that when the mask is in contact with the wearer’s skin,it
may cause allergic reaction to susceptible individuals.If this is
the case,leave the hazard area,remove the mask and seek doctor’s
advice.
6 . Expiry date
If maintained as per storage instructions , product can be used up
to 5 years from date of manufacture.
7 . Packing
Normal Packing 20pcs/box,400pcs/ctn
8 . Advantages
- Polypropylene (P.P.) outer layer provides smooth lining and avoids
loose fibres.
- Embossed fringe seal avoids fluffy open layer around the edges.
Latex-Free synthetic rubber headstrap.
- Contour design ensures the compatibility of glasses/goggles and
reduces fogging.
- Soft nose foam and adjustable nosepiece ensure custom shape and
increase the worker comfort and acceptance.
- Light wear and comfortable. Contour fit.Easy breathing/Speaking.
Clear vision. Free maintenance (disposable item).
- Better breathing provided by the exhalation valve.
- The ISO 9001 / ISO 14001 certified production guarantees the
reliability / regularity of the production and the control of the
environmental impact.
