MULTIFUNCTIONAAL PICK AND PLACE MACHINE
ETON SMT pick and place machine
ETON smt pick and place machine is very multifunction and high
speed. Suitable for mounting LED, capacitor, resistors, ic, shaped
components, etc. The highest speed can be reach 200000 cph.
As a high-tech company with CCC, CE, SIRA, ETON company provide all
SMT machine also support free install and training.
RT-1 Multifunction pick and place machine
RT-1 is SHENZHEN ETON AUTOMATION CO.,LTD new module. As the
multifunctional machine, it is suitable for mounting many kind of
components, like the led, capacitor, resistor, IC, shaped
components,etc. The max size can be 20 mm, the min size is 0402.
The capacity can be reach 40000 ch
The number of feeder station is 32 pcs
The number of nozzles is 10 pcs
High-precision printing, the first pass in SMT production
SMT printing is the first process of the surface mount production
line. The quality of the SMT printing has a very significant impact
on the pass rate of SMT products. An important factor that affects
the printing quality of solder paste is the accuracy of the motion
control of various parts of the printing press. At present, the
production of SMT products is developing toward high output rates
and "zero defects". High-speed operation, which puts high
requirements on the speed, stability and reliability of its motion
control system. The innovative technologies of the majority of
printing and assembly manufacturers are constantly challenging the
limits of quality and production efficiency.
With the miniaturization and high functionality of various
electronic devices, the requirements for high-density and
complexity in the mounting form are higher than now, especially for
the mounting of SMD and semiconductor mixed mounting. increase. In
order to promote the reduction of production costs and shorten the
delivery time, Shenzhen ETON Equipment Co., Ltd. has developed a
brand new automated placement machine that can meet the diverse
needs of different customers.
High quality and green counterparts, SMT reflow soldering pays more
attention to energy saving and environmental protection
SMT reflow soldering is a soldering method that re-melts the
pre-placed solder surface and no additional solder is added during
the soldering process. After heating the air or nitrogen to a
sufficiently high temperature through the heating circuit inside
the device Blowing to the circuit board where the component has
been attached, allowing the solder on both sides of the component
to melt and adhere to the motherboard, has become the mainstream
process of SMT. Most of the components on the board are soldered to
the circuit board through this process
Manufacturer service:
ETON highly value after-sales service:
1.ETON will provide one year warranty,during warranty, any parts
need to be repaird and changed will be free.
2.ETON will sent our engineer to your factory to install and
training, in freely.
3.ETON have a special overseas sales department, can support
quickly.
