T38 T45 T51 Atlas Copco Drill Striking Bar Shank Adapter for Top
Hammer Consumables
Shank adaptor or shank adapter/striking bar, the task of the shank
adapter is to transmit rotation torque, feed force, impact energy
and flushing medium to the drill string.
The shank adapters from KSQ are there fore designed to with stand
the high impact power of modern rock drills and made from specially
selected material which also is hardened through cauterizing.
Around 300 different shank adapters suitable for different rock
drills are currently available from Atlas Copco series drifters,
Tamrock series drifters, Garden Dever series drifters etc.
Detail:
Two flushing options of shank adapters: internal or external
- Internal flushing uses a water tube that fits through the center
of the drill and into an o-ring seal in the end of the shank, to
transfer flushing into the drill string
- External flushing, holes or a slot are required in the side of
the shank adapter.These line up between seals inside the front head
or water box of the rock drill, when the shank is installed.
Flushing medium is supplied directly to this device and is
introduced into the drill string through the shank
- External flushing is considered superior to internal flushing, as
greater volumes of flushing agent can be delivered with less risk
of leakage and hammer damage from water
The shanks for hydraulic drills and some pneumatic drills have
external or front head flushing. Hydraulic shanks generally have at
least 5 to 14-spline configuration, Pneumatic shanks tend to have
internal or through flushing and can generally be identified by
their lugs or 4-spline configuration.
Main Products:
1-12 inch middle-low/high air pressure DTH hammers & bits
Big hole high air pressure DTH hammer using in water well, oil, gas
and construction drilling
Eccentric overburden drilling Equipment
Hole opener bit
Rock thread bit (R22, R25, R28, R32, R35, R38, T38, T45,T51,
ST58,GT60)
Extension Rod, M/F Rod, M/m Rod, Drift Rod,
Shank adapter, coupling sleeves and all kinds of adapters
Other Shanks:
| Rock Drill | Thread | Length (mm) | Weight (Kg) |
COP 1550 EX
COP 1830 EX | T38 | 730 | 10.1 |
| T45 | 730 | 10.5 |
| T51 | 730 | 10.7 |
COP 1840 HE
COP 1850 | T45 | 565 | 7.2 |
| T51 | 565 | 7.4 |
BBC 43
BBC 44
BBC 45
BBC 100 | R32 | 380 | 2.2 |
|
|
|
COP 1036
COP 1038 HB | R32 | 500 | 4.3 |
| T38 | 500 | 4.7 |
| T45 | 500 | 5.3 |
COP 1038 HD
COP 1238 | R32 | 485 | 4.3 |
| R38 | 485 | 4.5 |
| T38 | 485 | 4.5 |
|
URD 475
URD 550
VL 120
EVL 130
VL140
F16 | R32 | 330 | 3.6 |
| R38 | 350 | 3.8 |
| T38 | 380 | 3.9 |
| T38 | 446 | 4.3 |
YH65
YH80 | T38 | 500 | 5.8 |
| T45 | 500 | 6.1 |
|
| HD609 | T38 | 620 | 6.2 |
| T38 | 690 | 6.5 |
| T45 | 620 | 6.9 |
| HD 612 | T45 | 710 | 9.2 |
| HD 712 | T45 | 788 | 11.2 |
|
HL 500S-38
HL 510S-38
HL 510B
HL 510HL | R32 | 460 | 3.9 |
| R38 | 460 | 4.1 |
| T38 | 460 | 4.1 |
| R38 | 500 | 4.3 |
| T38 | 500 | 4.3 |
HL 600-45
HL 600S-45 | T38 | 600 | 6.7 |
| T45 | 600 | 6.7 |
| R32 | 525 | 5.9 |
| T38 | 525 | 6 |
| T45 | 525 | 6.1 |
|
HC80
HC90
HC105 | R32 | 440 | 5.1 |
| R38 | 440 | 5.3 |
| T38 | 440 | 5.3 |
| T38 | 500 | 5.8 |
HC 80R
HC 120R
HC 150R | T45 | 670 | 8.3 |
| T51 | 670 | 8.3 |
