Amusement Park Swimming Pool Hotel Swimming Pool Heating Commercial
R22 Valley Wheel Compressor Air Source Heat Pump
Technology Specification
Rated voltage: 380V
Rated frequency: 50Hz
Rated current: 72A
Rated pressure: 0.4Mpa
Rated water temperature: 28 ° C
Maximum water temperature: 38 ° C
Water flow: 28000L/H
Interface size DN: 75 flange mm
Noise: 60Db
Porduct important parameters
Compression power: 21KW
Fan power: 8KW
Fresh air motor: 0.32KW
Total input power: 29.32KW
Heating capacity: 120KW
Cooling capacity: 85KW
Dehumidification capacity: 100L/H
Blower voltage: 380V
Air volume of the blower: (8437~13617) m3*2pcs
Blower full pressure: (805~868) Pa*2pcs
Static pressure of the blower: (744~708) Pa*2pcs
New fan voltage: 380V
Fresh air volume: 1500~3000m3
New fan full pressure: 266~245Pa
New fan static pressure: 219~145Pa
Features:
1. With Advanced DC inverter technology, it saves 40% energy than
normal heat pump in practical operation.
2. Manage heating, cooling and hot water, fits your need all year
round.
3. With temperature compensation function, the water setting
temperature adjusts automatically as the
house's heat loss changes.
4. Automatically variable fan speed to optimize heating efficiency.
5. Can work with room thermostat or master controller.
6. Can work with auxiliary heater.
7. Split design with water system indoor, preventing water frozen
problem.
8. Easy wire connection ,simplifies installation and avoids
mistakes.
9. With controller interface, plate heat exchanger, circulation
pump, flow switch, water pressure gauge in indoor unit.
10. Allows absence of buffer tank.
Porduct Advantage:
1. Initial heating state: At this time, the equipment
preferentially heats the swimming pool and dehumidifies the space.
2. Dehumidification state: At this time, the equipment will give
priority to heating and thermostating the swimming pool while
dehumidifying indoors;
3. Refrigeration Status: At this time, the water temperature in the
swimming pool reaches the set point. |
QC
1. Complying with ISO standard. Quality Ensured.
2. Complete Inspection for each unit before out of factory,
covering water system and electricity detection and testing,
ensuring 100% right product before shipment.
3. Strict quality control during production. We have liquid soap
detection, halogen detection, electrical detection and
water-soaking detection during production to avoid gas leakage and
electrical problems .
4. Full inspection on bigger parts such as compressors, condensers,
evaporators, expansion valves, flow switches, controllers etc..
Selection
inspection for small parts such as sensors, pressure switches etc..
5. Well noise control by using mute cotton for casing plates and
soft rubber feet for floating compressors, some of the models use
compressor
isolation shields.
6. Well insulated with insulated cotton for every pipe and parts,
include compressor, dryer filter and each pipes.
7. We have passed TUV and SGS inspections. We have CE, RoHs, IEC,
CCC, CB certificates for most of our products. Some of our products
have en14511 test, en14825 test.
A. Payment service
1. T/T
2. L/C (for container order only)
B. Technical service
1. We calculate the capacity and recommend the best models.
2.We supply you the professional refrigeration technical support
and electronic technical support for your installation, debugging
and operation.
3. We supply the spare parts and technical support in and after the
warranty time.
4. We supply the training course to your workers at our factory if
you need.
5. We can offer site training to your workers in your place which
is negotiable.
C. After-sales service
1. Technical support for your installation, operation and
maintenance.
2. Standard warranty time: One years’warranty for heat pumps
You can also pay for extended warranty or we can renegotiate the
longer warranty period.
3. Spare parts and technical support at most economic prices after
the warranty.
Certificsate we have got :
- ISO 9001, ISO 14000
- Our company has been inspected and certificate by EMC
- CE And EN14511, EN 14825-ERP for heat pump exported to europe
- Energy label for all heat pump models sold to oversea market
- Testing laboratory calibrated by CNAS
Packaging & Shipment
1>Meeting heat pump can sure delivery heat pump within 5~20
working days as we warehouse stock condition.
2>Heat pump with strong plywood pallet , strong plywood box for
loading, make sure no problem happen during rude transporattion .
3>All spare parts of the heat pump water heater will together
loading into package , one time finished shipment to buyer.
4>Take video of the heat pump for buyer before package to 100%
sure buyer get product same as order, no any different.
5>Meeting heat pump offer 100% test online, 5% test in Lab by 24
hour for one lot order (if not new model)
Packaging Details :Standard export packing -with plywoods case
packages,OEM is available for Factory price heat pump water heaters
Delivery Time :15 work days after arrival of down payment
